1. Remove the battery cover by placing your thumb on the indented portion on the rear

3. REGISTER THE ELECTRODE
5. Download the TRUEscience
app from the Google Play
Store by searching TRUEscience.
4. Create your Google account as
instructed by the tablet.
SET UP TABLET AND APP
1. Ensure your Android tablet is charged
2. Turn your tablet on and allow it to load. You
may need to work through setup steps on
first use depending on the model of the
tablet.
3. On the main screen, swipe down from the
top to access the settings and connection
options. Ensure that Wifi and Bluetooth are
turned on, and connect to your available Wifi
network (use the instruction manual for your
tablet for device specific instructions on this).
6. Touch the app icon to open it. Press and
hold the round blue raised button on the
front of your TRUEscience cap to turn it on.
A blue light will begin to flash on the cap,
and you will see the cap is in range as it will
appear on the cap overview screen on the
tablet. You can view up to 6 caps on
one tablet.
1. Touch the square
relating to your cap
on the overview
screen to open it in
meter view as shown
above. You can see
no electrode is
registered yet.
2. Touch the red “Add
Electrode from
Inventory” message
to access the inventory
screen shown above.
Touch the red + icon to
add an electrode.
3. Touch the “Tap to
Scan” icon to scan
the QR code of a
TRUEscience
electrode to register
it to the cap. (Skip
to step 5)
4. Alternatively touch
the drop down “pH
electrodes - no
cable” to select an
electrode from the
standard list, or
enter your own
electrode details by
pressing the red +
and choosing custom.
5. Information about
the electrode is
displayed. Rename
it or change its
expiry date here if
required. Touch
“SAVE” once you
are happy with the
changes.
6. The tablet will
return to the main
meter screen, you
can see the live
reading and the
electrode being used
is shown with a
tick.
The app will now
remind you when
this electrode is due
to be changed.
Power Button
Blue LED Light

---