Au howto audition sound effects fm

3. In the Effects Rack panel, open the Presets menu 

(Figure 4) and select On The Telephone.

Some presets include more than one effect. The On The 

Telephone preset applies three effects (Figure 5) that 

combine to make your audio sound as if it’s a recorded 

telephone conversation. 

Note: You can double-click on any of the effects in the 

Effects Rack panel to modify its properties. 

4. Play the sound file in the Waveform Editor to hear the 

effect. 

5. As the file plays, use the Toggle Power State button 

(Figure 5) beside each effect to toggle it off and on and 

listen to the clip with and without that effect applied.

Note: You can toggle the entire rack of effects on or off 

by using the Master Toggle Power State button in the 

lower-left corner of the Effects Rack panel (Figure 6).

6. As the file plays, use the Mix slider in the Effects Rack to 

adjust the intensity of the effect (Figure 6). 

Note: 100% (Wet) equals fully processed audio; 0% 

(Dry) equals original, unprocessed audio. 

You can also use the Input and Output adjustments to 

control the incoming sound level of the file and the 

output sound level of the file after you have added 

effects. Adjust these settings as needed to prevent the 

modified file from clipping. 

In Waveform view, effects in the rack are not applied to 

the sound file until you click the Apply button or save the 

file. If you don’t like an effect, just select it in the Effects 

Rack panel and press Delete.