Cisco Certified Network Associate 0 (ccna)

Correct Answer: A


QUESTION 26
Drag and drop the IPv6 address descriptions from the left onto the IPv6 address types on the right. Not all options are used.



A. Unique Local Addresses
-> IPv6 addresses that begin with FD
-> may be used by multiple organizations at the same time
-> private IPv6 addresses

Link-Local Addresses

-> serve as next-hop addresses
-> unable to serve as destination addresses


Correct Answer: A


QUESTION 27
(Question repeated)

How will Link Aggregation be implemented on a Cisco Wireless LAN Controller?

1. 
   To pass client traffic, two or more ports must be configured
   
2. 
   The EtherChannel must be configured in “mode active”
   
3. 
   When enabled, the WLC bandwidth drops to 500 Mbps
   
4. 
   One functional physical port is needed to pass client traffic
   

Correct Answer: D


QUESTION 28
(Question repeated) Refer to the exhibit.
Switch(config)#hostname R1 R1(config)#interface FastEthernet0/1 R1(config-if)#no switchport
R1(config-if)#ip address 10.100.20.42 255.255.255.0
R1(config-if)#line vty 0 4 R1(config-line)#login

An engineer booted a new switch and applied this configuration via the console port. Which additional configuration must be applied to allow administrators to authenticate directly to global configuration mode via Telnet using a local username and password?

1. 
   R1(config)#username admin R1(config-if)#line vty 0 4
   

R1(config-line)#password p@ss1234

2. 
   R1(config)#username admin R1(config-if)#line vty 0 4
   

R1(config-line)#password p@ss1234 R1(config-line)#transport input telnet

3. 
   R1(config)#username admin secret p@ss1234 R1(config-if)#line vty 0 4
   

R1(config-line)#login local R1(config)#enable secret p@ss1234

4. 
   R1(config)#username admin privilege 15 secret p@ss1234 R1(config-if)#line vty 0 4
   

R1(config-line)#login local