Cisco Certified Network Associate 0 (ccna)

Correct Answer: C


QUESTION 32
Refer to the exhibit.

Routers R1 and R3 have the default configuration. The router R2 priority is set to 99. Which commands on R3 configure it as the DR in the 10.0.4.0/24 network?

1. 
   R3(config)#interface Gig0/1 R3(config-if)#ip ospf priority 100
   
2. 
   R3(config)#interface Gig0/0 R3(config-if)#ip ospf priority 100
   
3. 
   R3(config)#interface Gig0/0 R3(config-if)#ip ospf priority 1
   
4. 
   R3(config)#interface Gig0/1 R3(config-if)#ip ospf priority 0
   

Correct Answer: A


QUESTION 33
Which QoS per-hop behavior changes the value of the ToS field in the IPv4 packet header?

1. 
   shaping
   
2. 
   marking
   
3. 
   policing
   
4. 
   classification
   

Correct Answer: B


QUESTION 34
Refer to the exhibit.

Router1#show ip route

Gateway of last resort is 10.10.11.2 to network 0.0.0.0 209.165.200.0/27 is subnetted, 1 subnets
B 209.165.200.224 [20/0] via 10.10.12.2,03:32:14
209.165.201.0/27 is subnetted, 1 subnets
B 209.165.201.0 [20/0] via 10.10.12.2,02:26:53
209.165.202.0/27 is subnetted, 1 subnets
B 209.165.202.128 [20/0] via 10.10.12.2,02:46:03
10.0.0.0/8 is variably subnetted, 10 subnets, 4 masks
O 10.10.13.0/25 [110/2] via 10.10.10.1,00:00:04, GigabitEthernet0/0
O 10.10.13.128/28 [110/2] via 10.10.10.5,00:00:12, GigabitEthernet0/1 O 10.10.13.144/28 [110/2] via 10.10.10.9,00:01:57, GigabitEthernet0/2 O 10.10.13.160/29 [110/2] via 10.10.10.5,00:00:12, GigabitEthernet0/1 O 10.10.13.208/29 [110/2] via 10.10.10.13,00:01:57, GigabitEthernet0/3 S* 0.0.0.0/0 [1/0] via 10.10.11.2
Which next-hop IP address does Router1 use for packets destined to host 10.10.13.158? A. 10.10.10.5
B. 10.10.11.2
C. 10.10.12.2
D. 10.10.10.9