Cisco Certified Network Associate 0 (ccna)

Correct Answer: D


QUESTION 14
What is an advantage of using auto mode versus static mode for power allocation when an access point is connected to a PoE switch port?

1. 
   The default level is used for the access point
   
2. 
   It detects the device is a powered device
   
3. 
   All four pairs of the cable are used
   
4. 
   Power policing is enabled at the same time
   

Correct Answer: B


QUESTION 15
Refer to the exhibit.

R1# show ip route | begin gateway Gateway of last resort is not set

172.16.0.0/16 is variably subnetted, 5 subnets, 5 masks
O 172.16.2.128/25 [110/3184437] via 207.165.200.250, 00:00:24, Serial0/0/0 O 172.16.3.64/27 [110/3184437] via 207.165.200.250, 00:00:24, Serial0/0/0 O 172.16.3.128/28 [110/3184437] via 207.165.200.250, 00:00:24, Serial0/0/0 O 172.16.3.192/29 [110/3184437] via 207.165.200.250, 00:00:24, Serial0/0/0 O 172.16.4.0/23 [110/3184437] via 207.165.200.250, 00:00:24, Serial0/0/0
207.165.200.0/24 is variably subnetted, 4 subnets, 2 masks C 207.165.200.248/30 is directly connected, Serial0/0/0
L 207.165.200.249/32 is directly connected, Serial0/0/0 C 207.165.200.252/30 is directly connected, Serial0/0/1 L 207.165.200.253/32 is directly connected, Serial0/0/1

Drag and drop the learned prefixes from the left onto the subnet masks on the right.

A. 172.16.4.0 – 255.255.254.0

172.16.2.128 – 255.255.255.128
172.16.3.64 – 255.255.255.224
172.16.3.128 – 255.255.255.240
172.16.3.192 – 255.255.255.248


Correct Answer: A


QUESTION 16
Drag and drop the Ansible features from the left to the right. Not all features are used.

A. uses the YAML language

executes modules via SSH by default pushes configurations to the client operates without agents