Cisco packet tracer dasturida wan tarmoqlarini loyihalash. Wan tarmoqlarida statik va dinamik marshrutlash

R1 marshrutizatorning konfiguratsiyasini sozlaymiz.

Router(config)#hostname R1
R1(config)#ipv6 unicast-routing
R1(config)#ipv6 router ospf 10
R1(config-rtr)#router-id 1.1.1.1
R1(config)#interface fastEthernet 0/0
R1(config-if)#ipv6 enable
R1(config-if)#ipv6 address 2001:DB8:1::1/120
R1(config-if)#ipv6 ospf 10 area 1
R1(config-if)#end

R1 ning qolgan interface larini ham shu yo’sinda sozlaymiz.

2. 
   R2 marshrutizatorning konfiguratsiyasini sozlaymiz.
   

Router(config)#hostname R2

Router(config)#ipv6 unicast-routing
R2(config)#ipv6 router ospf 10
R2(config-rtr)#router-id 2.2.2.2
R2 (config)#interface fastEthernet 0/0
R2 (config-if)#ipv6 enable
R2 (config-if)#ipv6 address 2001:DB8:2::1/120
R2(config-if)#ipv6 ospf 10 area 2
R2(config)#interface serial 0/3/0
R2(config-if)#ipv6 enable
R2(config-if)#ipv6 address 2001:DB8:30::1/126
R2(config-if)#ipv6 ospf 10 area 0
R2(config-if)#exit
R2(config)#interface serial 0/3/1
R2(config-if)#ipv6 enable
R2(config-if)#ipv6 address 2001:DB8:10::2/126
R2(config-if)#ipv6 ospf 10 area 0
R2(config-if)#exit
R2(config)#ipv6 route ::/0 2001:DB8:100::2
R2#copy running-config startup-config

R3 internet bilan boglanganligi uchun default-information originate kommandasi yoziladi

R3(config)#ipv6 route ::/0 2001:DB8:100::2

R3(config)#ipv6 router ospf 10
R3(config-rtr)#default-information originate

R1 da

R2 da

R3 da

4. Hisobot tarkibi

Hisobotda quyidagilar keltirilishi lozim:

- Ishning nomi va maqsadi.
- Ishni bajarilganligini ko’rsatuvchi “screen shot” lar.
- Ishning natijasi.
- Nazorat savollariga qisqacha javoblar.