4. REGISTER THE SMART QR BUFFERS
1. The electrode must
be calibrated before
use. Touch the red
“UNCALIBRATED”
message at the
bottom of the screen
to begin.
2. The calibration
screen opens. The
buffers must be
added first, touch the
+ icon in the white bar
at the top of the
screen to add buffers.
3. The inventory is
shown but there
are currently no
buffers in the
inventory. Touch
the red + icon to
add the buffers.
4. Add buffers either
from the lists of
standard or custom
buffers, or touch the
“tap to scan” icon to
quickly add QR
TRUEscience buffers.
5. The QR scanner
opens, point the
camera on your
device at the QR
code on the buffer
and hold steady for
2 seconds to allow it
to scan.
6. When the buffer has
been recognised, the
information and
documents are
shown. View the
MSDS or certificates
of analysis specific to
this buffer by
touching the relevant
fields here. Touch
“SAVE” to finish.
7. The buffer is added
to the inventory
and the App will
now remind you
when it is expiring.
Note: if you have
manually added
buffers without
adding the expiry
date you will not
get an expiry
reminder.
8. Add the other
buffers in the same
way. All will be
added to the list.
You are now ready
to calibrate the
electrode. To delete
a buffer press on
the buffer’s colour
square and swipe
right.
“tap to scan” icon to
1. Pour a small amount
of each buffer into
separate beakers and
rinse your electrode
with de-ionised water
and then touch the
green play icon to
begin.
2. Place the electrode in
the buffer highlighted
on screen and stir
gently. Stop stirring to
allow reading to
stabilise.
3. Once the reading is
stable, the
SAVE
icon turns green:
Touch the
SAVE
icon
to save the
calibration
point and
move on to
the next
highlighted
buffer.
4. Repeat until all
buffers have been
used. Rinse the
electrode between
each reading. If icon
does not turn green
replace your buffers
and ensure your rinse
step is adequate.
5. Once all buffers
have been used a
message will
appear showing
the completed
calibration results
and electrode
health. Touch
“KEEP” to save the
calibration and
return to the
calibration screen.
6. Touch “METER” to
return to the meter
view. We can now
see the live reading
and can see the
electrode is
connected and
calibrated. You can
now begin testing.
The App will remind
you when the next
calibration is due.
5. CALIBRATE THE ELECTRODE
ACCESSORIES AND SPECIFICATIONS
WWW.TRUESCIENCE.CO.UK
Combination pH electrode glass with S7 connector
1201575
Combination pH electrode double junction flat with S7 connector
1201574
Combination pH electrode double junction epoxy with S7 connector
1201711
Replacement Lithium battery for SMART Cap
1201564
Spare battery covers colour coded Grey, Teal, Red (Set of 3)
1201710
Spare battery covers colour coded White, Teal, Red (Set of 3)
1201813
Tablet 7”/ 8” Bluetooth® enabled Android
1201708
Storage Stand (includes storage tubes)
1201695
Spare storage tubes for storage stand (Pack of 2)
1201696
Charging tablet stand includes USB Cable
1201562
Height adjustable tablet stand, Stainless steel, non-charging
1201563
Replacement SMART Clip
1201698
Additional SMART Cap (supplied withbattery and 3x colour coded covers, without electrode) 1201689
250ml
500ml
1000ml
Buffer solution pH 4.00 ± 0.01 @ 20°C Red
1201459
1144885
1144887
Buffer solution pH 7.00 ± 0.01 @ 20°C Yellow
1201458
1144955
1144960
Buffer solution pH 10.00 ± 0.01 @ 20°C Blue
1201460
1145008
1145011
pH electrode storage solution
-
1145514
-
Electrode cleaning solution (pepsin/hydrochloric)
-
1145463
-
TECHNICAL SPECIFICATION
pH Range
0-14 pH units
Resolution
0.01pH , 0.1mV, 0.1°C
Meter Precision
±0.002pH
Electrode accuracy
±0.02pH
Calibration points
up to 5 points
Buffer Recognition
QR Code Input
Automatic temperature compensation
0°C - 100.0°C
Electrode diagnostics
Yes
mV range
±1000mV
mV accuracy
±0.1mV
Temperature accuracy
±0.5°C
Store values
10,000 measurements/log
Battery Life
1 year normal use
Battery Type
1/2 AA Lithium Thionyl Chloride, 3.6V, 1200mA
Tablet and App requirements
See above or specified list of tested models on our website
Dimensions of Cap
W48 x D24 x L218 mm including temperature probe
Temperature probe length
130mm long
Weight
91.5 g
Operating/Storage Temperature
0-55°C
Calibration Certainty
Yes, App indicates calibration status, time and date
Electrode health reminders
Yes
Colour keyed battery covers
Yes
Multiple Cap Measurements
Yes, up to 6 simultaneously
Consumables ordering online
Yes
Compatible with any S7 connector pH electrode
Yes
Interval logging
Yes
Tablet Requirements:
The TRUEscience App has been designed with responsive screensso is suitable
for a wide range of Android phones and tablets. Bluetooth® 4.0 or later and Android 4.4 or later are
required. You will require a WiFi connection for data sharing and full App functionality. The App will run in
the background and will require access to GPS, Camera, Bluetooth® and sharing Apps such as GMail,
Dropbox and Googledrive.
EN61236-1:2006 - Annex A and B 2008: 1999/5/EC Annex III - Complies with R&TTE Directive 1999/5/EC
and RoHS recast directive 2011/65/EU
Contains transmitter module FCC ID:QOQBLE113. The Bluetooth® transceiver device meets the requirement for
modular transmitter approval as detailed in FCC public notice DA00-1407
v1.0 10/16
Multiple patents pending
Patents
FCC
Document Outline - Truescience Quick Online p1v2
- Truescience Quick Online p2v2
- Truescience Quick Online p3v2
- Truescience Quick Online p4v2
- Truescience Quick Online p5v2
- Truescience Quick Online p6v2
Dostları ilə paylaş: |