|
3.4.3 The Pedal Tab
The settings in the Pedal tab let you adjust how the piano pedals will respond to pedal action.
Alicia’s piano has the Sustain (Damper) and Sustenuto pedals. The Sustain Pedal causes the
dampers to be lifted off all strings of the piano, allowing them to ring out while the pedal is
depressed. The Sustenuto Pedal has the same effect, but only on the notes that are played
before the pedal is depressed, and afterwards are released. These notes will continue to ring
out after they have been released.
The Pedal tab
•
Half Pedaling: Click the button labeled
Simulate Half Pedaling with Impulse Response
to enable
half pedaling simulation (based upon impulse responses). When this is enabled, you can
gradually press the Sustain Pedal and the more you press it the more resonance emerg-
es. In this way you can go continuously from a pedal-up sound to a pedal-down sound.
This assumes that you have a Sustain Pedal that is capable of sending continuous values.
%
Note: If you play a note with the pedal up and then press the pedal afterwards, the triggered
pedal-up sample will gradually change into a more pedal-down like one. This is simulated
using the Impulse Response. However, if you play a note while the pedal is down, releasing the
pedal afterwards will not cause a gradual change of the sound.
•
Dostları ilə paylaş: | 
