Refer to the exhibit. Switch#show etherchannel summary

Answer:
A 
Explanation
With the configuration in answer A, the data VLAN should be in VLAN 20 and it is sent to the 
switch untagged while traffic from the voice VLAN 30 will be tagged. 
Question 40
Refer to the exhibit. 

---

Which minimum configuration items are needed to enable Secure Shell version 2 access to R15? 
A. Router(config)#hostname R15 
R15(config)#crypto key generate rsa general-keys modulus 1024 
R15(config-line)#line vty 0 15 
R15(config-line)# transport input ssh 
R15(config)#ip ssh source-interface Fa0/0 
R15(config)#ip ssh stricthostkeycheck 
B. Router(config)#ip domain-name cisco.com 
Router(config)#crypto key generate rsa general-keys modulus 1024 
Router(config)#ip ssh version 2 
Router(config-line)#line vty 0 15 
Router(config-line)# transport input all 
Router(config)#ip ssh logging events 
C. Router(config)#hostname R15 
R15(config)#ip domain-name cisco.com 
R15(config)#crypto key generate rsa general-keys modulus 1024 
R15(config)#ip ssh version 2 
R15(config-line)#line vty 0 15 
R15(config-line)# transport input ssh 
D. Router(config)#crypto key generate rsa general-keys modulus 1024 
Router(config)#ip ssh version 2 
Router(config-line)#line vty 0 15 
Router(config-line)# transport input ssh 
Router(config)#ip ssh logging events 
R15(config)#ip ssh stricthostkeycheck 

---

Answer:
C 
Explanation
Steps to configure SSH: 
1. Configure the router hostname using command “hostname”. 
2. Configure the domain name using command “ip domain-name”. 
3. Generate public and private keys using command “crypto key generate rsa”. 
4. Create a user in the local database using command “username…secret”. 
5. Allow only SSH access on VTY lines using command “transport input ssh”. 
Reference: 
https://ipwithease.com/how-to-configure-ssh-version-2-on-cisco-router/
 
Question 41
Refer to the exhibit. 
Users need to connect to the wireless network with IEEE 802.11r-compatible devices. The 
connection must be maintained as users travel between floors or to other areas in the building. 
What must be the configuration of the connection? 
A. Select the WPA Policy option with the CCKM option 
B. Disable AES encryption 
C. Enable Fast Transition and select the FT 802.1x option 
D. Enable Fast Transition and select the FT PSK option