Refer to the exhibit. Switch#show etherchannel summary

Answer:
A 
Question 34

---

Which QoS per-hop behavior changes the value of the ToS field in the IPv4 packet header? 
A. shaping 
B. marking 
C. policing 
D. classification 
Answer:
B 
Question 35
Refer to the exhibit. 
Router1#show ip route 
Gateway of last resort is 10.10.11.2 to network 0.0.0.0 
209.165.200.0/27 is subnetted, 1 subnets
B 209.165.200.224 [20/0] via 10.10.12.2,03:32:14 
209.165.201.0/27 is subnetted, 1 subnets
B 209.165.201.0 [20/0] via 10.10.12.2,02:26:53 
209.165.202.0/27 is subnetted, 1 subnets
B 209.165.202.128 [20/0] via 10.10.12.2,02:46:03 
10.0.0.0/8 is variably subnetted, 10 subnets, 4 masks
O 10.10.13.0/25 [110/2] via 10.10.10.1,00:00:04, GigabitEthernet0/0 
O 10.10.13.128/28 [110/2] via 10.10.10.5,00:00:12, GigabitEthernet0/1 
O 10.10.13.144/28 [110/2] via 10.10.10.9,00:01:57, GigabitEthernet0/2 
O 10.10.13.160/29 [110/2] via 10.10.10.5,00:00:12, GigabitEthernet0/1 
O 10.10.13.208/29 [110/2] via 10.10.10.13,00:01:57, GigabitEthernet0/3 
S* 0.0.0.0/0 [1/0] via 10.10.11.2 
Which next-hop IP address does Router1 use for packets destined to host 10.10.13.158? 
A. 10.10.10.5 
B. 10.10.11.2 
C. 10.10.12.2 
D. 10.10.10.9 

---

Answer:
D 
Explanation
10.10.13.158 belongs to prefix 10.10.13.144/28 so the next-hop 10.10.10.9 will be chosen to 
forward packet for this destination. 
Question 36
What is one reason to implement LAG on a Cisco WLC? 
A. to increase security and encrypt management frames 
B. to provide link redundancy and load balancing 
C. to allow for stateful and link-state failover 
D. to enable connected switch ports to failover and use different VLANs