American National Standards Maintained Under Continuous Maintenance


In accordance with clause 4.7.2 Continuous maintenance of American National Standards, of the ANSI Essential Requirements, we agree to the following requirements



Yüklə 0,55 Mb.
səhifə6/7
tarix26.07.2017
ölçüsü0,55 Mb.
1   2   3   4   5   6   7

In accordance with clause 4.7.2 Continuous maintenance of American National Standards, of the ANSI Essential Requirements, we agree to the following requirements:





  • A documented program for periodic publication of revisions has been established. A copy is attached. (See ASC A108 Committee Procedures)

  • The published standard(s) shall include a clear statement of the intent to consider requests for change and information on the process associated with the submittal of such requests. The language of this statement is as follows:

This standard is under continuous maintenance and always open for comment and proposed revisions. Please submit comments and proposed revisions to the Committee Secretary, Katelyn Simpson, ksimpson@tcnatile.com”

  • Procedures for timely, documented consensus action on each request for change have been established. (See ASC A108 Committee Procedures)

  • The following person(s) may be contacted by those interested in submitting changes (please include name, address, E-mail, phone and fax):

Name: Katelyn Simpson

Address: 100 Clemson Research Blvd

City: Anderson State: SC Zip: 29625

Phone: 864-646-8453

Fax: 864-646-2821

E-mail: ksimpson@tileusa.com



Underwriters Laboratories, Inc. (UL)

Continuous Maintenance language applicable to all eligible Standards:

The most recent approval of UL as an American National Standard (ANS) occurred on ___and covers the ___Edition, including revisions through ___. Approval of UL ___as an American National Standard is maintained using the continuous maintenance process. Comments or proposals for revision on any pert of the Standard may be submitted to UL at any time. Written comments are to be sent to the UL staff person listed below.  



Procedure to request voting membership on the standing canvass group also known as the Standards Technical Panel:
Contact the UL staff person listed below.

Schedule:

For standards maintained under the continuous maintenance option, UL shall address any comments or proposals for revision submitted for consideration on any part of a standard. UL will submit the proposal or comment to its consensus body for consideration within a reasonable time frame, not to exceed two years. The submitter will be notified of the expected time frame for consideration of the proposal. If no changes are made within four years of the ANSI approval date, UL shall apply for reaffirmation of the standard(s). 





Contact: Deborah Prince
Underwriters Laboratories Inc.
12 Laboratory Drive
Research Triangle Park, NC 27709-3995
Telephone: (919) 549-1460
Fax: (919) 547-6178
Email: Deborah.R.Prince@us.ul.com

  • UL 1, Flexible Metal Conduit

  • UL 4, Armored Cable

  • UL 5, Surface Metal Raceways and Fittings

  • UL 5A, Nonmetallic Surface Raceways and Fittings

  • UL 5B, Strut-Type Channel Raceways Fittings

  • UL 5C, Surface Raceways and Fittings for Use with Data, Signal, and Control Circuits

  • UL 6, Electrical Rigid Metal Conduit - Steel

  • UL 6A, Electrical Rigid Metal Conduit – Aluminum, Red Brass and Stainless Steel

  • UL 8, Standard for Foam Extinguisher

  • UL 9, Standard for Safety for Fire Tests of Window Assemblies

  • UL 10A, Tin-Clad Fire Doors

  • UL 10B, Fire Tests of Door Assemblies

  • UL 10C, Positive Pressure Fire Tests of Door Assemblies

  • UL 10D, Fire Tests of Fire Protective Curtain Assemblies

  • UL 13, Power-Limited Circuit Cables

  • UL 14B, Sliding Hardware for Standard, Horizontally Mounted Tin-Clad Fire Doors

  • UL 14C, Swinging Hardware for Standard Tin-Clad Fire Doors Mounted Singly and in Pairs

  • UL 20, General-Use Snap Switches

  • UL 21, LP-Gas Hose

  • UL 22, Standard for Safety for Amusement and Gaming Machines

  • UL 25, Meters for Flammable and Combustible Liquids and LP-Gas

  • UL 25A, Standard for Meters for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0 -E85)

  • UL 25B, Standard for Meters for Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations up to 20 Percent (B20), Kerosene, and Fuel Oil

  • UL 30, Metal Safety Cans

  • UL 32, Metal Waste Cans

  • UL 33, Standard for Safety for Heat Responsive Links for Fire Protection Services

  • UL 38, Manual Signaling Boxes for Fire Alarm Systems

  • UL 44, Thermoset-Insulated Wires and Cables

  • UL 45, Portable Electric Tools

  • UL 47, Standard for Safety for Semiautomatic Fire Hose Storage Devices

  • UL 48, Electric Signs

  • UL 50, Enclosures for Electrical Equipment

  • UL 50E, Standard for Safety for Enclosures for Electrical Equipment, Environmental Considerations

  • UL 51, Power-Operated Pumps and Bypass Valves for Anhydrous Ammonia, LP-Gas and Propylene

  • UL 58, Steel Underground Tanks for Flammable and Combustible Equipment

  • UL 62, Flexible Cord and Fixture Wire

  • UL 66, The Standard for Fixture Wire

  • UL 67, Panelboards

  • UL 69, Electric-Fence Controllers

  • UL 72, Standard for Tests for Fire Resistance of Record Protection Equipment

  • UL 73, Motor-Operated Appliances

  • UL 79, Ninth Edition of the Standard for Safety for Power-Operated Pumps for Petroleum Dispensing Products

  • UL 79A Standard for Safety for Power-Operated Pumps for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0 – E85)

  • UL 79B Standard for Safety for Power-Operated Pumps for Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations up to 20 Percent (B20), Kerosene, and Fuel Oil

  • UL 80, Standard for Safety for Steel Tanks for Oil-Burner Fuel

  • UL 82, Gardening Appliances

  • UL 83, Thermoplastic-Insulated Wires and Cables

  • UL 87, Power-Operated Dispensing Devices for Petroleum Products

  • UL 87A, Standard for Safety for Power-Operated Dispensing Devices for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0 – E85)

  • UL 87B, Standard for Safety for Power-Operated Dispensing Devices for Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations up to 20 Percent (B20), Kerosene, and Fuel Oil

  • UL 94, Tests for Flammability of Plastics Materials for Parts in Devices and Appliances

  • UL 96, Lightning Protection Equipment

  • UL 98, Enclosed and Dead-Front Switches



  • UL 100, Sustainability of Gypsum Boards and Panels

  • UL 101, Leakage Current for Appliances

  • UL 103, Factory-Built Chimneys for Residential Type and Building Heating Appliances

  • UL 104, Standard for Safety for Elevator Door Locking Devices and Contacts

  • UL 109, Tube Fitting for Flammable and Combustible Fluids, Refrigeration Service, and Marine Use

  • UL 110, Standard for Sustainability of Mobile Phones.

  • UL 122, Photographic Equipment

  • UL 123, Standard for Oxy-Fuel Gas Torches

  • UL 125, Valves for Anhydrous Ammonia and LP-Gas (Other than Safety Relief)

  • UL 127, Factory-Built Fireplaces

  • UL 132 Safety Relief Valves for Anhydrous Ammonia and LP-Gas

  • UL 136, Standard for Safety for Pressure Cookers

  • UL 140, Relocking Devices for Safes and Vaults

  • UL 141, Garment Finishing Appliances

  • UL 142, Steel Aboveground Tanks for Flammable and Combustible Liquids

  • UL 144 Standard for Safety for LP-Gas Regulators

  • UL 147, Hand Held Torches for Fuel Gases

  • UL 147A, Standard for Safety for Nonrefillable (Disposable) Type Fuel Gas Cylinder Assemblies

  • UL 147B, Nonrefillable (Disposable) Type Metal Container Assemblies for Butane

  • UL 150, Antenna Rotators

  • UL 153, Standard for Safety for Portable Electric Luminaires

  • UL 154, Standard for Carbon Dioxide Fire Extinguisher

  • UL 155, Standard for Tests for Fire Resistance of Vault and File Room Doors

  • UL 174, Household Electric Storage Tank Water Heaters

  • UL 180, Standard for Safety for Liquid-Level Gauges for Oil Burner Fuels and Other Combustible Liquids

  • UL 181,  Standard for Safety for Factory-Made Air Ducts and Air Connectors

  • UL 181A,  Standard for Safety for Closure Systems for Use With Rigid Air Ducts

  • UL 181B, Standard for Safety for Closure Systems for Use With Flexible Air Ducts and Air Connectors

  • UL 183, Manufactured Wiring Systems

  • UL 187, X-Ray Equipment

  • UL 193, Alarm Valves for Fire-Protection Service

  • UL 197, Commercial Electric Cooking Appliances

  • UL 198M-2003, Mine-Duty Fuses

  • UL 199, Automatic Sprinklers for Fire-Protection Services



  • UL 201, Garage Equipment

  • UL 203, Standard for Safety for Pipe Hanger Equipment for Fire Protection Service

  • UL 203A, Standard for Safety for Sway Brace Devices for Sprinkler System Piping

  • UL 207, Refrigerant-Containing Components and Accessories, Nonelectrical

  • UL 209, Cellular Metal Floor Raceways and Fittings

  • UL 213, Rubber Gasketed Fittings for Fire Protection Service

  • UL 213C, Standard for Safety for Grooved and Plain End Fittings

  • UL 217, Standard for Safety for Smoke Alarms

  • UL 218A, Battery Contractors for Use in Diesel Engines Driving Centrifugal Fire Pumps

  • UL 218, Standard for Safety for Fire Pump Controllers

  • UL 224, the Standard for Extruded Insulating Tubing

  • UL 231, Standard for Safety for Power Outlets

  • UL 234, Low Voltage Lighting Fixtures for Use in Recreational Vehicles

  • UL 242, Nonmetallic Containers for Waste Paper

  • UL 244A, Solid-State Controls for Appliances

  • UL 248-1, Low-Voltage Fuses-Part 1: General Requirements

  • UL 248-2, Low-Voltage Fuses-Part 2: Class C Fuses

  • UL 248-3, Low-Voltage Fuses-Part 3: Class CA and CB Fuses

  • UL 248-4, Low-Voltage Fuses-Part 4: Class CC Fuses

  • UL 248-5, Low-Voltage Fuses-Part 5: Class G Fuses

  • UL 248-6, Low-Voltage Fuses-Part 6: Class H Non-Renewable Fuses

  • UL 248-7, Low-Voltage Fuses-Part 7: Class H Renewable Fuses

  • UL 248-8, Low-Voltage Fuses-Part 8: Class J Fuses

  • UL 248-9, Low-Voltage Fuses-Part 9: Class K Fuses

  • UL 248-10, Low-Voltage Fuses-Part 10: Class L Fuses

  • UL 248-11, Low-Voltage Fuses-Part 11: Plug Fuses

  • UL 248-12, Low-Voltage Fuses-Part 12: Class R Fuses

  • UL 248-13, Low-Voltage Fuses-Part 13: Semiconductor Fuses

  • UL 248-14, Low-Voltage Fuses-Part 14: Supplemental Fuses

  • UL 248-15, Low-Voltage Fuses-Part 15: Class T Fuses

  • UL 248-16, Low-Voltage Fuses-Part 16: Test Limiters

  • UL 252, Compressed Gas Regulators

  • UL 252A, Compressed Gas Regulator Accessories, under Continuous Maintenance

  • UL 260, Standard for Safety for Dry Pipe and Deluge Valves for Fire-Protection Services

  • UL 263, Fire Tests of Building Construction and Materials

  • UL 268, Standard for Safety for Smoke Detectors for Fire Alarm Systems

  • UL 268A, Standard for Smoke Detectors for Duct Application

  • UL 275, Automotive Glass Tube Fuses

  • UL 283, Standard for Safety for Air Fresheners and Deodorizers

  • UL 291, Automated Teller Systems

  • UL 294, Access Control System Units

  • UL 294B, Power Over Ethernet (PoE) Power Sources for Access Control Systems and Equipment

  • UL 295, Standard for Safety for Commercial-Industrial Gas Burners

  • UL 296, Oil Burners

  • UL 296A, Standard for Safety for Waste Oil-Burning Air-Heating Appliances

  • UL 297, Acetylene Generators, Portable, Medium-Pressure

  • UL 299, Standard for Dry-Chemical Fire Extinguisher



  • UL 300, Fire Testing of Fire Extinguishing Systems for Protection of Commercial Cooking Equipment

  • UL 305, Panic Hardware

  • UL 307A, Liquid Fuel-Burning Heating Appliances for Manufactured Homes and Recreational Vehicles

  • UL 310, Electrical Quick-Connect Terminals

  • UL 312, the Standard for Safety for Check Valves for Fire-Protection Service

  • UL 325, Standard for Safety for Door, Drapery, Gate, Louver, and Window Operators and Systems

  • UL 330, Hose and Hose Assemblies for Dispensing Flammable Liquids

  • UL 331, Standard for Safety for Strainers for Flammable Fluids and Anhydrous Ammonia

  • UL 331A, Strainers for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations Up to 85 Percent (E0 - E85)

  • UL 331B, Strainers for Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations Up to 20 Percent (B20), Kerosene, and Fuel Oil

  • UL 343, Pumps for Oil-Burning Appliances

  • UL 346, Waterflow Indicators for Fire Protective Signaling Systems

  • UL 347, High Voltage Industrial Control Equipment

  • UL 347A, Standard for Safety for Medium Voltage Power Conversion Equipment

  • UL 353, Limit Controls

  • UL 355, Cord Reels

  • UL 360, Liquid-Tight Flexible Steel Conduit

  • UL 363, Knife Switches

  • UL 365, Police Station Connected Burglar Alarm Units and Systems

  • UL 372, Primary Safety Controls and Gas and Oil Fired Appliances

  • UL 379, Power Units for Fountain, Swimming Pool, and Spa Luminaires

  • UL 385, Play Pipes for Water Testing in Fire Prevention Service

  • UL 391, Standard for Safety for Solid-Fuel and Combination-Fuel Central and Supplementary Furnaces

  • UL 399, Drinking-Water Coolers



  • UL 401, Standard for Safety for Portable Spray Hose Nozzles for Fire-Protection Service

  • UL 404, Gauges, Indicating Pressure, for Compressed Gas Service

  • UL 405, Standard for Safety for Fire Department Connections

  • UL 407, Manifolds for Compressed Gases

  • UL 412, Refrigeration Unit Coolers

  • UL 414, Meter Sockets

  • UL 416, Refrigerated Medical Equipment

  • UL 427, Refrigerating Units

  • UL 428A, Electrically Operated Valves for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations Up to 85 Percent (E0 - E85)

  • UL 428B, Electrically Operated Valves for Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations Up to 20 Percent (B20), Kerosene, and Fuel Oil

  • UL 430, Waste Disposers

  • UL 437, Key Locks

  • UL 441, Standard for Safety for Gas Vents

  • UL 443, Standard for Safety for Steel Auxiliary Tanks for Oil-Burner Fuel

  • UL 444 Standard for Safety for Communication Cables

  • UL 448, Standard for Safety for Pumps for Fire-Protection Services

  • UL 448A, Flexible Couplings and Connecting Shafts for Stationary Fire Pumps

  • UL 448B, Residential Fire Pumps Intended for One- and Two-Family Dwellings and Manufactured Home

  • UL 448C, Stationary, Rotary-Type, Positive-Displacement Pumps for Fire Protection

  • UL 452, Antenna-Discharge Units

  • UL 458, Power Converters/Inverters and Power Converter/Inverter Systems for Land Vehicles and Marine Crafts

  • UL 464, Standard for Safety for Audible Signaling Devices for Fire Alarm and Signaling Systems, Including Accessories

  • UL 464A, Standard for Safety for Audible Signal Appliances for General Signaling Use

  • UL 466, Electric Scales and Accessories

  • UL 467, Grounding and Bonding Equipment

  • UL 471, Commercial Refrigerators and Freezers

  • UL 474, Dehumidifiers

  • UL 482,  Standard for Safety for Portable Sun/Heat Lamps

  • UL 484, Room Air Conditioners

  • UL 486A-486B, Standard for Safety for Wire Connectors

  • UL 486C, Splicing Wire Connectors

  • UL 486D, Insulated Wire Connectors for Use with Underground Conductors

  • UL 486E, Equipment Wiring Conductors

  • UL 486F, Standard for Bare and Covered Ferrules;

  • UL 489, Molded-Case Circuit Breakers and Circuit-Breaker Enclosures

  • UL 489A, Circuit Breakers For Use in Communications Equipment

  • UL 489B, the Standard for Safety for Molded-Case Circuit Breakers, Molded-Case Switches, and Circuit-Breaker Enclosures For Use With Photovoltaic (PV) Systems

  • UL 493, Thermoplastic-Insulated Underground Feeder and Branch-Circuit Cables

  • UL 496, Edison-Base Lampholders

  • UL 497, Protectors for Paired-Conductor Communications Circuits

  • UL 497A, Secondary Protectors for Communications Circuits

  • UL 497B, Protectors for Data Communications and Fire Alarm Circuits

  • UL 497C, Protectors for Coaxial Communications Circuits

  • UL 498, Attachment Plugs and Receptacles

  • UL 498A, Standard for Safety for Current Taps and Adapters

  • UL 499, Standard for Safety for Electric Heating Appliances



  • UL 506, Specialty Transformers

  • UL 507, Electric Fans

  • UL 508, Industrial Control Equipment

  • UL 508C, Standards for Safety for Power Conversion Equipment

  • UL 514A, Standard for Safety for Metallic Outlet Boxes

  • UL 514B, Conduit, Tubing, and Cable Fittings

  • UL 514C, Nonmetallic Outlet Boxes, Flush-Device Boxes and Covers

  • UL 514D, Cover Plates for Flush-Mounted Wiring Devices

  • UL 521, Heat Detectors for Fire Protective Signaling Systems

  • UL 525, Standard for Safety for Flame Arresters

  • UL 539, Standard for Safety for Single and Multiple Station Heat Alarms

  • UL 541, Refrigerated Vending Machines

  • UL 542, Standard for Fluorescent Lamp Starters

  • UL 551, Transformer-Type Arc-Welding Machines

  • UL 555, Fire Dampers

  • UL 555C, Ceiling Dampers

  • UL 555S, Smoke Dampers

  • UL 558, Standard for Safety for Industrial Trucks, Internal Combustion Engine-Powered

  • UL 561, Standard for Floor-Finishing Machines

  • UL 563, Ice Makers

  • UL 565, Liquid-Level Gauges for Anhydrous Ammonia and LP-Gas

  • UL 567, Emergency Breakaway Fittings, Swivel Connectors and Pipe-Connection Fittings for Petroleum Products and LP-Gas

  • UL 567A, Standard for Safety for Emergency Breakaway Fittings, Swivel Connectors and Pipe-Connection Fittings for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0 – E85)

  • UL 567B, Standard for Safety for Emergency Breakaway Fittings, Swivel Connectors and Pipe-Connection Fittings for Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations up to 20 Percent (B20), Kerosene, and Fuel Oil

  • UL 568, Standard for Safety for Nonmetallic Cable Tray Systems

  • UL 569, Pigtails and Flexible Hose Connectors for LP-Gas

  • UL 574, Standard for Safety for Electric Oil Heaters

  • UL 580, Standard for Tests for Uplift Resistance of Roof Assemblies

  • UL 583, Electric-Battery-Powered Industrial Trucks

  • UL 586, High-Efficiency, Particulate, Air Filter Units

  • UL 588, Seasonal and Holiday Decorative Products



  • UL 603, Power Supplies for Use with Burglar Alarm Systems

  • UL 606, Linings and Screens for Use with Burglar-Alarm Systems

  • UL 608, Burglary Resistant Vault Doors and Modular Panels

  • UL 609, Local Burglar Alarm Units and Systems,

  • UL 618, Concrete Masonry Units

  • UL 621, Standard for Safety for Ice Cream Makers

  • UL 626, Standard for 2-1/2 Gallon Stored-Pressure, Water-Type Water Extinguisher UL 150, Antenna Rotators

  • UL 634, Connectors and Switches for Use with Burglar-Alarm Systems

  • UL 635, Standard for Safety for Insulating Bushings

  • UL 639, Intrusion-Detection Units

  • UL 641, Standard for Safety for Type L Low-Temperature Venting Systems

  • UL 644, Container Assemblies for LP-Gas

  • UL 651, Standard for Safety for Schedule 40, 80, Type EB and A Rigid PVC Conduit and Fittings

  • UL 651A, Standard for Safety for Schedule 40 and 80 High Density Polyethylene (HDPE) Conduit

  • UL 668, Standard for Safety for Hose Valves for Fire-Protection Service

  • UL 674, Electric Motors and Generators for Use in Division 1 Hazardous (Classified) Locations

  • UL 676, Underwater Luminaires and Submersible Junction Boxes

  • UL 680, Emergency Vault Ventilators and Vault-Ventilating Ports

  • UL 681, Installation and Classification of Burglar and Holdup Alarm Systems

  • UL 687, Burglary-Resistant Safes

  • UL 696, Standard for Electric Toys

  • UL 697, Toy Transformers

  • UL 698, Industrial Control Equipment for Use in Hazardous (Classified) Locations

  • UL 698A, Standard for Safety for Industrial Control Panels Relating to Hazardous Locations



  • UL 705, Power Ventilators

  • UL 710, Exhaust Hoods for Commercial Cooking Equipment

  • UL 710B, Standard for Safety for Recirculating Systems

  • UL 711, Standard for Rating and Fire Testing of Fire Extinguisher

  • UL 719, Nonmetallic-Sheathed Cables

  • UL 723, Test for Surface Burning Characteristics of Building Materials

  • UL 729, Oil-Fired Floor Furnaces

  • UL 730, Oil-Fired Wall Furnaces

  • UL 731, Oil-Fired Unit Heaters

  • UL 732, Standard for Safety for Oil-Fired Storage Tank Water Heaters

  • UL 737, Standard for Safety for Fireplace Stoves

  • UL 746A, Standard for Safety for Polymeric Materials - Short Term Property Evaluations

  • UL 746B, Polymeric Materials-Long Term Property Evaluations

  • UL 746C, Polymeric Materials-Use in Electrical Equipment Evaluations

  • UL 746D, Standard for Safety for Polymeric Materials - Fabricated Parts

  • UL 746E, Polymeric Materials-Industrials Laminates, Filament Wound Tubing, Vulcanized Fiber, and Material Used in Printed Wiring Boards

  • UL 746F, Standard for Polymeric Materials - Flexible Dielectric Film Materials for Use in Printed Wiring Boards and Flexible Materials Interconnect Constructions

  • UL 749, Household Dishwashers

  • UL 751, Vending Machines

  • UL 752, Bullet-Resisting Equipment

  • UL 753, Alarm Accessories for Automatic Water-Supply Control Valves for Fire Protection Service

  • UL 758, Standard for Appliance Wiring Material

  • UL 763, Motor-Operated Commercial Food Preparing Machines

  • UL 768, Combination Locks

  • UL 771, Night Depositories

  • UL 773A, Nonindustrial Photoelectric Switches for Lighting Control

  • UL 778, Motor-Operated Water Pumps

  • UL 779, Electrically Conductive Flooring

  • UL 783, Electric Flashlights and Lanterns for Hazardous (Classified) Locations

  • UL 786, Key-Locked Safes (Class KL)

  • UL 789, Indicator Posts for Fire-Protective Services

  • UL 790, Tests for Fire Resistances of Roof Covering Materials

  • UL 793, Standard for Automatically Operated Roof Vents for Smoke and Heat

  • UL 796, Printed-Wiring Boards

  • UL 796F, Flexible Materials Interconnect Constructions

  • UL 797, Electrical Metallic Tubing

  • UL 797A, Electrical Metallic Tubing - Aluminum



  • UL 810, Capacitors

  • UL 810A, Electrochemical Capacitors

  • UL 810B, DC Power Capacitors

  • UL 814, Gas-Tube Sign and Ignition Cable

  • UL 817, Cord Sets and Power Supply Cords

  • UL 823, Electric Heaters for Use in Hazardous (Classified) Locations

  • UL 827, Central-Station Alarm Services

  • UL 834, Heating, Water Supply, and Power Boilers-Electric

  • UL 840, Insulation Coordination Including Clearances and Creepage Distances in Electrical Equipment

  • UL 842, Standard for Safety for Valves for Flammable Fluids

  • UL 842A, Standard for Safety for Valves for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0 – E85)

  • UL 842B, Standard for Safety for Valves for Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations up to 20 Percent (B20), Kerosene, and Fuel Oil

  • UL 844, Luminaires for Use in Hazardous (Classified) Locations

  • UL 845, Motor Control Centers

  • UL 852, Standard for Metallic Sprinkler Pipe for Fire Protection Service

  • UL 854, Service-Entrance Cables

  • UL 857, Standard for Safety for Busways

  • UL 858, Standard for Safety for Household Electric Ranges

  • UL 858A, Standard for Safety-Related Solid-State Controls for Household Electric

  • UL 859, Household Electric Personal Grooming Appliances

  • UL 864, Control Units and Accessories for Fire Alarm Systems

  • UL 867, Electrostatic Air Cleaners

  • UL 870, Wireways, Auxiliary Gutters, and Associated Fittings

  • UL 873, Temperature-Indicating and Regulating Equipment

  • UL 875, Electric Dry-Bath Heaters

  • UL 879, Electric Sign Components

  • UL 879A, LED Sign and Sign Retrofit Kits

  • UL 884, Underfloor Raceways and Fittings

  • UL 886, Outlet Boxes and Fittings for Use in Hazardous (Classified) Locations

  • UL 887, Delayed-Action Timelocks

  • UL 891, Dead-Front Switchboards

  • UL 896, Standard for Safety for Oil-Burning Stoves



  • UL 900, Air Filter Units

  • UL 907, Fireplace Accessories

  • UL 910, Flame-Propagation and Smoke-Density Values for Electrical and Optical-Fiber Cables Used in Spaces Transporting Environmental Air

  • UL 913, Intrinsically Safe Apparatus and Associated Apparatus for Use in Class I, II, and III, Division 1, Hazardous (Classified) Locations

  • UL 921, Commercial Electric Dishwashers

  • UL 923, Microwave Cooking Appliances

  • UL 924, Emergency Lighting and Power Equipment

  • UL 935, Fluorescent Lamp Ballasts

  • UL 943, Ground Fault Circuit Interrupters

  • UL 959, Medium Heat Appliance Factory-Built Chimneys

  • UL 961, Standard for Safety for Electric Hobby and Sports Equipment

  • UL 962, Standard for Safety for Household and Commercial Furnishings.

  • UL 969, Marking and Labeling Systems

  • UL 972, Burglary Resisting Glazing Material

  • UL 977, The Standard for Fused Power-Circuit Devices

  • UL 982, Motor-Operated Household Food Preparing Machines

  • UL 985, Household Fire Warning System Units

  • UL 987, Stationary and Fixed Electric Tools

  • UL 998, Humidifiers



  • UL 1002, Electrically Operated Valves for Use in Hazardous (Classified) Locations

  • UL 1004-1, Rotating Electrical Machines - General Requirements

  • UL 1004-2, Impedance Protected Motors

  • UL 1004-3, Thermally Protected Motors

  • UL 1004-4, Electric Generators

  • UL 1004-5, Fire Pump Motors

  • UL 1004-6, Servo and Stepper Motors

  • UL 1004-7, Electronically Protected Motors

  • UL 1004-8, Inverter Duty Motors

  • UL 1004-9, Standard for Safety for Form Wound and Medium Voltage Rotating Electrical  Machines

  • UL 1008, Transfer Switch Equipment

  • UL 1008A, Medium-Voltage Transfer Switches

  • UL 1008S, Standard for Safety for Solid-State Transfer Switches

  • UL 1010, Receptacle-Plug Combinations for Use in Hazardous (Classified) Locations

  • UL 1012, Power Units Other Than Class 2

  • UL 1017, Vacuum Cleaners, Blower Cleaners and Household Floor Finishing Machines

  • UL 1020, Thermal Cutoffs for Use in Electrical Appliances and Components

  • UL 1022, Standard for Safety for Line Isolation Monitors

  • UL 1023, Household Burglar-Alarm System Units

  • UL 1026, Electric Household Cooking and Food Appliances

  • UL 1029, High-Intensity Discharge Lamp Ballasts

  • UL 1030, Sheathed Heating Elements

  • UL 1034, Burglary-Resistant Electric Locking Mechanisms

  • UL 1037, Antitheft Alarms and Devices

  • UL 1040, Fire Test of Insulated Wall Construction

  • UL 1042, Electric Baseboard Heating Equipment

  • UL 1046, Grease Filters for Exhaust Ducts

  • UL 1047, Standard for Safety for Isolated Power Systems Equipment

  • UL 1053, Standard for Safety for Ground-Fault Sensing and Relaying Equipment

  • UL 1054, Special Use Switches

  • UL 1059, Standard for Safety for Terminal Blocks

  • UL 1062, Standard for Safety for Unit Substations

  • UL 1063, Machine-Tool Wire and Cables

  • UL 1066, Low Voltage AC and DC Power Circuit Breakers Used in Enclosures

  • UL 1067, Electrically Conductive Equipment and Materials for Use in Flammable Anesthetizing Locations

  • UL 1069, Hospital Signaling and Nurse Call Equipment

  • UL 1072, Medium Voltage Power Cables

  • UL 1076, Proprietary Burglar Alarm Units and Systems

  • UL 1077, Supplementary Protectors for Use in Electrical Equipment

  • UL 1081, Swimming Pool Pumps, Filters and Chlorinators

  • UL 1082, Household Electric Coffee Makers and Brewing-Type Appliances

  • UL 1083, Household Electric Skillets and Frying-Type Appliances

  • UL 1086, Household Trash Compactors

  • UL 1088,  Standard for Safety for Temporary Lighting Strings

  • UL 1090, Electric Snow Movers



  • UL 1123, Standard for Marine Buoyant Devices

  • UL 1175, Buoyant Cushions

  • UL 1177, Buoyant Vests

  • UL 1180, Standard for Fully Inflatable Recreational Personal Floatation Devices

  • UL 1191, Standard for Components for PFDs

  • UL 1197, Immersion Suits



  • UL 1203, Standard for Safety for Explosion-Proof and Dust-Ignition-Proof Electrical Equipment for Use in Hazardous (Classified) Locations

  • UL 1206, Electric Commercial Clothes-Washing Equipment

  • UL 1207, Sewage Pumps for Use in Hazardous (Classified) Locations

  • UL 1236, the Standard for Safety for Battery Chargers for Charging Engine-Starter Batteries

  • UL 1238, Control Equipment for Use with Flammable Liquid Dispensing Devices

  • UL 1240 Standard for Safety for Electric Commercial Clothes-Drying Equipment

  • UL 1241, Junction Boxes for Swimming Pool Luminaires

  • UL 1242, Electrical Intermediate Metal Conduit – Steel

  • UL 1247, Standard for Safety for Diesel Engines for Driving Centrifugal Fire Pumps

  • UL 1254, Standard for Safety for Pre-Engineered Type Dry Chemical Extinguishing System Units

  • UL 1256, Fire Test of Roof Deck Constructions

  • UL 1261, Electric Water Heaters for Pools and Tubs

  • UL 1275, Flammable Liquid Storage Cabinets

  • UL 1277, Electrical Power and Control Tray Cables with Optional Optical-Fiber Members

  • UL 1278, Movable and Wall-or-Ceiling-Hung Electric Room Heaters

  • UL 1283, Electromagnetic Interference Filters

  • UL 1286, Office Furnishings

  • UL 1296, Standard for Safety for Shear Resistance Tests for Ceiling Boards for Manufactured Homes



  • UL 1309, Standard for Marine Shipboard Cable

  • UL 1310, Class 2 Power Units

  • UL 1313, Nonmetallic Safety Cans for Petroleum Products

  • UL 1314, Special-Purpose Metal Containers

  • UL 1315, Metal Waste Paper Containers

  • UL 1316, Standard for Safety for Glass-Fiber-Reinforced Plastic Underground Storage Tanks for Petroleum Products, Alcohols, and Alcohol-Gasoline Mixtures

  • UL 1322, Standard for Safety for Fabricated Scaffold Planks and Stages

  • UL 1323, Standard for Safety for Scaffold Hoists

  • UL 1332, Organic Coatings for Steel Enclosures for Outdoor Use Electrical Equipment

  • UL 1340, Standard for Hoists

  • UL 1370, Unvented Alcohol Fuel Burning Decorative Appliances

  • UL 1384, Standard for Water-Based Automatic Extinguisher Units



  • UL 1411, Sixth Edition of the Standard for Television and Motor Transformers for Audio-, Radio-, and Television-Type Appliances

  • UL 1412, Fusing Resistors and Temperature-Limited Resistors for Radio- and Television-Type Appliances

  • UL 1413, High-Voltage Components for Television-Type Appliances

  • UL 1416, Overcurrent and Overtemperature Protectors for Radio- and Television-Type Appliances

  • UL 1417, Special Fuses for Radio- and Television-Type Appliances

  • UL 1419, Professional Video and Audio Equipment

  • UL 1424, Cables for Power-Limited Fire-Alarm Circuits

  • UL 1425, Cables for Non-Power-Limited Fire-Alarm Circuits

  • UL 1426, Standard for Safety for Electrical Cables for Boats

  • UL 1429, Pullout Switches

  • UL 1439, UL’s Standard for Safety for Tests for Sharpness of Edges on Equipment

  • UL 1441, Standard for Safety for Coated Electrical Sleeving

  • UL 1446, Standard for Safety for Systems of Insulating Materials - General

  • UL 1447, Electric Lawn Mowers

  • UL 1449, Standard for Safety for Surge Protective Devices

  • UL 1450, Motor-Operated Air Compressors, Vacuum Pumps and Painting Equipment

  • UL 1453, Electric Boosters and Commercial Storage Tank Water Heaters

  • UL 1468, Direct Acting Pressure Reducing and Pressure Restricting Valves

  • UL 1478, Fire Pump Relief Valves

  • UL 1478A, Pressure Relief Valves for Sprinkler Systems

  • UL 1479, Fire Tests of Through-Penetration Firestops

  • UL 1480, Standard for Safety for Speakers for Fire Alarm and Signaling Systems, Including Accessories

  • UL 1480A, Standard for Safety for Speakers for Commercial and Professional Use

  • UL 1482, Standard for Solid-Fuel Type Room Heaters

  • UL 1484, Residential Gas Heaters

  • UL 1486, Quick Opening Devices for Dry Pipe Valves for Fire-Protection Service

  • UL 1489, Standard for Safety for Fire Tests of Fire Resistant Pipe Protection Systems Carrying Combustible Liquids



  • UL 1517, Hybrid Personal Flotation Devices

  • UL 1557, Electrically Isolated Semiconductor Devices

  • UL 1558, Standard for Safety for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear

  • UL 1559, Standard for Safety for Insect-Control Equipment - Electrocution Type

  • UL 1561, Standard for Dry-Type General Purpose and Power Transformers

  • UL 1563, Electric Spas, Equipment Assemblies, and Associated Equipment

  • UL 1564, the Standard for Safety for Industrial Battery Chargers

  • UL 1565, Wire Positioning Devices

  • UL 1567, Standard for Safety for Receptacles and Switches Intended for Use with Aluminum Wire

  • UL 1569, Metal-Clad Cables

  • UL 1574, Track Lighting Systems

  • UL 1577, Optical Isolators

  • UL 1581, Reference Standard for Electrical Wires, Cables, and Flexible Cords

  • UL 1585, Standard for Class 2 and Class 3 Transformers

  • UL 1598, Standard for Safety for Luminaires

  • UL 1598A, Standard for Safety for Supplemental Requirements for Luminaires

  • UL 1598B, Standard for Safety for Supplemental Requirements for Luminaire Reflector Kits for Installation on Previously Installed Fluorescent Luminaires

  • UL 1598C, Standard for Safety for Light-Emitting Diode (LED) Retrofit Luminaire Conversion Kits



  • UL 1602, Gasoline-Engine-Powered, Rigid-Cutting-Member Edgers and Edger-Trimmers

  • UL 1610, Central-Station Burglar Alarm Units

  • UL 1626, Standard for Safety for Residential Sprinklers for Fire-Protection Service

  • UL 1635, Digital Alarm Communicator System Units

  • UL 1638, Standard for Safety for Visible Signaling Devices for Fire Alarm and Signaling Systems, Including Accessories

  • UL 1640, Standard for Safety for Portable Power-Distribution Equipment

  • UL 1641, Installation and Classification of Residential Burglar Alarm Systems

  • UL 1647, Motor-Operated Massage and Exercise Machines

  • UL 1650, Portable Power Cable

  • UL 1651, Optical Fiber Cables

  • UL 1653, Electrical Nonmetallic Tubing

  • UL 1655, Community-Antenna Television Cables

  • UL 1659, Standard for Safety for Attachment Plug Blades for Use in Cord Sets and Power-Supply Cords

  • UL 1660, Liquid-Tight Flexible Nonmetallic Conduit

  • UL 1664, Immersion-Detection Circuit-Interrupters

  • UL 1666, Test for Flame Propagation Height of Electrical and Optical-Fiber Cables Installed Vertically in Shafts

  • UL 1676, Conductive-Path and Discharge-Path Resistors for Use in Radio-, Video-, or Television-Type Appliances

  • UL 1678, Household Commercial, and Professional-Use Carts and Stands

  • UL 1681, Standard for Safety for Wiring Device Configurations

  • UL 1682, Plugs, Receptacles and Cable Connectors, of the Pin and Sleeve Type

  • UL 1685, the Standard for Vertical-Tray Fire-Propagation and Smoke-Release Test for Electrical and Optical-Fiber Cables

  • UL 1686, Pin and Sleeve Configurations

  • UL 1690, Data-Processing Cable

  • UL 1691, Single Pole Locking-Type Separable Connectors

  • UL 1692, Polymeric Materials - Coil Forms

  • UL 1694, Tests for Flammability of Small Polymeric Component Materials

  • UL 1696, Standard for Safety for Mechanical Protection Tubing (MPT) and Fittings

  • UL 1699 Standard for Safety for Arc-Fault Circuit-Interrupters



  • UL 1703, Standard for Safety for Flat-Plate Photovoltaic Modules and Panels

  • UL 1709, Standard for Safety for Rapid Rise Fire Tests of Protection Materials for Structural Steel

  • UL 1715, Fire Test of Interior Finish Material

  • UL 1727, Commercial Electric Personal Grooming Appliances

  • UL 1730, Smoke Detector Monitors and Accessories for Individual Living Units of Multifamily Residences and Hotel/Motel Rooms

  • UL 1738, Standard for Safety for Venting Systems for Gas-Burning Appliances, Categories II, III, IV

  • UL 1739, Standard for Safety for Pilot Operated Pressure Control Valves

  • UL 1746, Standard for Safety for External Corrosion Protection Systems for Steel Underground Storage Tanks, UL 1746

  • UL 1767, Standard for Safety for Early-Suppression Fast-Response Sprinklers

  • UL 1769, Standard for Cylinder Valves

  • UL 1776, The Standard for High-Pressure Cleaning Machines

  • UL 1777, Standard for Safety for Chimney Liners

  • UL 1778, Standard for Safety for Uninterruptible Power System

  • UL 1784, Standard for Air Leakage Tests of Door Assemblies

  • UL 1786, Standard for Safety for Direct Plug-In Nightlights



  • UL 1803, Standard for Safety for Factory Follow-Up on Third Party Certified Portable Fire Extinguishers

  • UL 1820, Fire Test of Pneumatic Tubing for Flame and Smoke Characteristics

  • UL 1821, The Standard for Safety for Thermoplastic Sprinkler Pipe and Fittings for Fire Protection Service

  • UL 1838, Standard for Safety for Low Voltage Landscape Lighting

  • UL 1839, Standard for Safety for Automotive Battery Booster Cables

  • UL 1853, Nonreusable Plastic Containers for Flammable and Combustible Liquids

  • UL 1863, Communications-Circuit Accessories

  • UL 1876, Standard for Safety for Isolating Signal and Feedback Transformers for Use in Electronic Equipment.

  • UL 1887, Fire Test of Plastic Sprinkler Pipe for Visible Flame and Smoke Characteristics

  • UL 1889, Standard for Safety for Commercial Filters for Cooking Oil,

  • UL 1897, Uplift Tests for Roof Covering Systems



  • UL 1917, Standard for Safety for Solid State Fan Speed Controls

  • UL 1951, Electrical Plumbing Accessories

  • UL 1963, Refrigerant Recovery/Recycling Equipment

  • UL 1971, Signaling Devices for the Hearing Impaired

  • UL 1973, Batteries for Use in Light Electric Rail (LER) Applications and Stationary Applications

  • UL 1978, The Standard for Safety for Grease Ducts

  • UL 1981-2014, Standard for Safety for Central-Station Automation Systems

  • UL 1989, Standby Batteries

  • UL 1990, Nonmetallic Underground Conduit with Conductors

  • UL 1993, Standard for Self-Ballasted Lamps and Lamp Adapters

  • UL 1994, Luminous Egress Path Marking Systems

  • UL 1995, Heating and Cooling Equipment

  • UL 1996, Electric Duct Heaters

  • UL 1998, Standard for Safety for Software in Programmable Components



  • UL 2006, Standard for Safety for Halon 1211 Recovery/Recharge Equipment

  • UL 2007A, Shatter Containment Of Lamps For Use In Regulated Food Establishments

  • UL 2017, General-Purpose Signaling Devices and Systems

  • UL 2021, Standard for Fixed and Location-Dedicated Electric Room Heaters

  • UL 2024, Optical Fiber Cable Raceway

  • UL 2034, Single and Multiple Station Carbon Monoxide Alarms

  • UL 2043, Fire Test for Heat and Visible Smoke Release for Discrete Products and Their Accessories Installed in Air-Handling Spaces

  • UL 2044, Commercial Closed Circuit Television Equipment

  • UL 2061, Standard for Safety for Adapters and Cylinder Connection Devices for Portable LP-Gas Cylinder Assemblies

  • UL 2075, Gas and Vapor Detectors and Sensors

  • UL 2079, Tests for Fire Resistance of Building Joint Systems

  • UL 2085, Protected Aboveground Tanks for Flammable and Combustible Liquids

  • UL 2089, Standard for Safety for Vehicle Battery Adapters



  • UL 2108, Standard for Safety for Low Voltage Lighting Systems

  • UL 2111, Standard for Safety for Overheating Protection for Motors

  • UL 2115, Processed Solid-Fuel Firelogs

  • UL 2127, Inert Gas Clean Agent Extinguishing System Units

  • UL 2129, Standard for Safety for Halocarbon Clean Agent Fire Extinguishers

  • UL 2157, Electric Clothes Washing Machines and Extractors

  • UL 2158, Electric Clothes Dryers

  • UL 2158A, Standard for Clothes Dryer Transition Duct

  • UL 2162-2014 Standard for Safety for Commercial Wood-Fired Baking Ovens - Refractory Type

  • UL 2166, Halocarbon Clean Agent Extinguishing System Units

  • UL 2167, Standard for Safety for Water Mist Nozzles for Fire Protection

  • UL 2170, Field Conversion/Retrofit of Products to Change to an Alternative Refrigerant-Construction and Operation

  • UL 2171, Field Conversion/Retrofit of Products to Change to an Alternative Refrigerant-Insulating Material and Refrigerant Compatibility

  • UL 2172, Field Conversion/Retrofit of Products to Change to an Alternative Refrigerant -Procedures and Methods

  • UL 2182, Refrigerants

  • UL 2196, Standard for Tests for Fire Resistive Cables



  • UL 2200, Standard for Safety for Stationary Engine Generator Assemblies

  • UL 2202, Electric Vehicle (EV) Charging System Equipment

  • UL 2208, Standard for Safety for Solvent Distillation Units

  • UL 2205, Field Conversion/Retrofit of Alternative Refrigerants in Household Refrigerators and Freezers

  • UL 2218, Standard for Safety for Impact Resistance of Prepared Roof Covering Materials

  • UL 2225, Standard for Safety for Cables and Cable-Fittings for Use in Hazardous (Classified) Locations

  • UL 2227, Standard for Overfilling Prevention Devices

  • UL 2238, Cable Assemblies and Fittings for Industrial Control and Signal Distribution

  • UL 2239, Hardware for the Support of Conduit, Tubing, and Cable

  • UL 2250, Standard for Safety for Instrumentation Tray Cable

  • UL 2251, Standard for Safety for Plugs, Receptacles, and Couplers for Electric Vehicles

  • UL 2255, Receptacle Closures

  • UL 2577, Standard for Suspended Ceiling Grid Low Voltage Systems and Equipment

  • UL 2267, Fuel Cell Power Systems for Installation in Industrial Electric Trucks

  • UL 2271, Batteries for Use in Light Electric Vehicle (LEV) Applications

  • UL 2272, Standard for Safety for Electrical Systems for Self-Balancing Scooters

  • UL 2279, Electrical Equipment for Use in Class 1, Zone 0,1, and 2 Hazardous (Classified) Locations

  • UL 2231-1, Standard for Safety for Personnel Protection Systems for Electric Vehicle (EV) Supply Circuits; Part 1: General Requirements

  • UL 2231-2, Standard for Safety for Personnel Protection Systems for Electric Vehicle (EV) Supply Circuits; Part 2: Particular Requirements for Protection Devices for Use in Charging Systems

  • UL 2333, Standard for Safety for Infrared Thermometers

  • UL 2335, Fire Tests of Storage Pallets

  • UL 2344, Standard for Safety for Material Lifts

  • UL 2351, Standard for Safety for Spray Nozzles for Fire-Protection Service

  • UL 2353, Standard for Safety for Single- and Multi-Layer Insulated Winding Wire

  • UL 2360, the Standard for Test Methods for Determining the Combustibility Characteristics of Plastics Used in Semi-Conductor Tool Construction

  • UL 2367, Solid-State Overcurrent Protectors

  • UL 2368, Standard for Safety for Fire Exposure Testing of Intermediate Bulk Containers for Flammable and Combustible Liquids

  • UL 2388, Standard for Safety for Flexible Lighting Products

  • UL 2390, Test Method for Wind Resistant Asphalt Shingles with Sealed Tabs

  • UL 2416, Standard for Safety for Audio/Video, Information and Communication Technology Equipment Cabinet, Enclosure and Rack Systems

  • UL 2420, Standard for Safety for Belowground Reinforced Thermosetting Resin Conduit (RTRC) and Fittings

  • UL 2431, Durability of Spray-Applied Fire Resistive Materials

  • UL 2438, The Standard for Safety for Outdoor Seasonal-Use Cord-Connected Wiring Devices

  • UL 2442, Standard for Safety for Wall- and Ceiling-Mounts and Accessories

  • UL 2443, Standard for Safety for Flexible Sprinkler Hose with Fittings for Fire Protection Service

  • UL 2459, Standard for Safety for Insulated Multi-Pole Splicing Wire Connectors

  • UL 2460, Nonshielded Cable

  • UL 2515, Standard for Safety for Aboveground Reinforced Thermosetting Resin Conduit (RTRC) and Fittings

  • UL 2515A, Standard for Safety for Supplemental Requirements for Extra Heavy Wall Reinforced Thermosetting Resin Conduit (RTRC) and Fittings

  • UL 2518, Standard for Safety for Air Dispersion Systems

  • UL 2523, Solid Fuel-Fired Hydronic Heating Appliances, Water Heaters, And Boilers

  • UL 2556, Standard for Safety for Wire and Cable Test Methods

  • UL 2586A, Standard for Safety for Hose Nozzle Valves for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0 – E85)

  • UL 2586B, Standard for Safety for Hose Nozzle Valves for Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations up to 20 Percent (B20), Kerosene, and Fuel Oil

  • UL 2560, Emergency Call Systems for Assisted Living and Independent Living Facilities

  • UL 2561, 1400 Degree Fahrenheit Factory-Built Chimneys

  • UL 2572, Mass Notification Systems

  • UL 2577, Standard for Safety for Suspended Ceiling Grid Low Voltage Systems and Equipment

  • UL 2580, Batteries for Use in Electric Vehicles

  • UL 2586, Standard for Safety for Hose Nozzle Valves

  • UL 2592, Standard for Safety for Low Voltage LED Wire

  • UL 2594, Standard for Safety for Electric Vehicle Supply Equipment

  • UL 2595, General Requirements for Battery-Powered Appliances

  • UL 2703, Standard for Mounting Systems, Mounting Devices, Clamping/Retention Devices, and Ground Lugs for Use with Flat-Plate Photovoltaic Modules and Panels  

  • UL 2737, Standard for Safety for Crane Insulators

  • UL 2738, Standard for Safety for Induction Power Transmitters and Receivers for use with Low Energy Products

  • UL 2775, Standard for Fixed Condensed Aerosol Extinguishing System Units

  • UL 2788, the Standard for Safety for Industrial and Commercial Vibrators

  • UL 2790, Standard for Safety for Commercial Incinerators

  • UL 2846, Standard for Safety for Fire Test of Plastic Water Distribution Plumbing Pipe for Visible Flame and Smoke Characteristics

___________________________________________________________________________

  • UL 3703, Standard for Solar Trackers

  • UL 3730, Standard for Photovoltaic Junction Boxes



  • UL 4200A, Products Incorporating Button or Coin Cell Batteries of Lithium Technologies

  • UL 4248-1, Fuseholders - Part 1: General Requirements

  • UL 4248-4, Fuseholders - Part 4: Class CC

  • UL 4248-5, Fuseholders - Part 5: Class G

  • UL 4248-6, Fuseholders - Part 6: Class H

  • UL 4248-8, Fuseholders - Part 8: Class J

  • UL 4248-9, Fuseholders - Part 9: Class K

  • UL 4248-11, Fuseholders - Part 11: Type C (Edison Base) and Type S Plug Fuse

  • UL 4248-12, Fuseholders - Part 12: Class R

  • UL 4248-15, Fuseholders - Part 15: Class T

  • UL 4703, Photovoltaic Wire



  • UL 5085-1, Standard for Low Voltage Transformers -  Part 1: General Requirements

  • UL 5085-2, Standard for Low Voltage Transformers -  Part 2: General Purpose Transformers

  • UL 5085-3, Standard for Low Voltage Transformers -  Part 3: Class 2 and Class 3 Transformers



  • UL 6141, Standard for Safety for Wind Turbines Permitting Entry of Personnel

  • UL 6142, Small Wind Turbine Systems

  • UL 6703, Standard for Connectors for Use in Photovoltaic Systems

  • UL 8750, Standard for Light Emitting Diode (LED) Equipment for Use in Lighting Products

  • UL 8752, First Edition of the Standard for Organic Light Emitting Diode (OLED) Panels

  • UL 8753, The Standard for Field-Replaceable Light Emitting Diode (LED) Light Engines

  • UL 8754, The Standard for Holders, Bases, and Connectors for Solid-State (LED) Light Engines and Arrays



  • UL 9540-2016, Standard for Safety for Energy Storage Systems and Equipment



  • UL 60034-1, Rotating Electrical Machines - Part 1: Rating and Performance

  • UL 60034-2-1, Standard for Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)

  • UL 60079-0, Standard for Safety for Electrical Apparatus for Explosive Gas Atmospheres - Part 0: General Requirements

  • UL 60079-1, Standard for Safety for Explosive Atmospheres – Part 1: Equipment Protection by Flameproof Enclosures “d”

  • UL 60079-2, Explosive Atmospheres – Part 2: Equipment Protection by Pressurized Enclosure “p”

  • UL 60079-5, Standard for Safety for Explosive Atmospheres -  Part 5: Equipment Protection by Powder Filling “q”

  • UL 60079-6, Standard for Safety for Explosive Atmospheres - Part 6: Equipment Protection by Oil-Immersion “o”

  • UL 60079-7, Standard for Safety for Explosive Atmospheres - Part 7: Equipment Protection by Increased safety “e”

  • UL 60079-11, Standard for Safety for Explosive Atmospheres - Part 11: Equipment Protection by Intrinsic Safety “i”

  • UL 60079-15, Standard for Safety for Electrical Apparatus for Explosive Gas Atmospheres - Part 15: Construction, Test and Marking of Type of Protection “n” Electrical Apparatus

  • UL 60079-18, Standard for Safety for Explosive Atmospheres - Part 18: Equipment Protection by Encapsulation “m” UL 60320-1, Standard for Safety for Appliance Couplers for Household and Similar General Purposes - Part 1: General Requirements

  • UL 60079-25, Standard for Safety for Explosive Atmospheres – Part 25: Intrinsically Safe Electrical Systems

  • UL 60079-26, Standard for Safety for Explosive Atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga

  • UL 60079-31, Standard for Safety for Explosive Atmospheres – Part 31: Equipment Dust Ignition Protection by Enclosure “t”

  • UL 60320-1, Standard for Safety for Appliance Couplers for Household and Similar General Purposes - Part 1: General Requirements

  • UL 60335-1, Standard for Safety for Safety of Household and Similar Electrical Appliances, Part 1: General Requirements

  • UL 60335-2-3; Standard for Safety for Household and Similar Electrical Appliances, Part 2: Particular Requirements for Electric Irons.

  • UL 60335-2-8, Standard for Safety for Household and Similar Electrical Appliances, Part 2: Particular Requirements for Shavers, Hair Clippers, and Similar Appliances

  • UL 60335-2-24, Standard for Safety for Household and Similar Appliances, Particular Requirements for Refrigerating Appliances, Ice Cream Appliances and Ice Makers

  • UL 60335-2-34, Household and Similar Electrical Appliances, Part 2: Particular Requirements for Motor-Compressors

  • UL 60335-2-40, Household and Similar Electrical Appliances, Part 2: Particular Requirements for Electrical Heat Pumps, Air-Conditioners and Dehumidifiers

  • UL 60384-14, Standard for Safety for Fixed Capacitors for Use in Electronic Equipment - Part 14: Sectional Specification: Fixed Capacitors for Electromagnetic Interference Suppression and Connection to the Supply Mains

  • UL 60691, Thermal-Links - Requirements and Application Guide

  • UL 60730-1, Automatic Electrical Controls - Part 1, General Requirements

  • UL 60730-2-3, Automatic Electrical Controls for Household and Similar Use - Part 2, Particular Requirements for Thermal Protectors for Ballasts for Tubular Fluorescent Lamps

  • UL 60730-2-5, Standard for Safety for Automatic Electrical Controls for Household and Similar Use, Part 2: Particular Requirements for Automatic Electrical Burner Control Systems

  • UL 60730-2-6, Automatic Electrical Controls for Household and Similar Use - Part 2, Particular Requirements for Automatic Electrical Pressure Sensing Controls Including Mechanical Requirements

  • UL 60730-2-7, Automatic Electrical Controls for Household and Similar Use - Part 2, Particular Requirements for Timers and Time Switches

  • UL 60730-2-8, Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Electrically Operated Water Valves, Including Mechanical Requirements

  • UL 60730-2-9, Automatic Electrical Controls for Household and Similar Use - Part 2, Particular Requirements for Temperature Sensing Controls

  • UL 60730-2-10, Automatic Electrical Controls for Household and Similar Use - Part 2, Particular Requirements for Motor Starting Relays

  • UL 60730-2-11, Automatic Electrical Controls for Household and Similar Use - Part 2, Particular Requirements for Energy Regulators

  • UL 60730-2-12, Automatic Electrical Controls for Household and Similar Use - Part 2, Particular Requirements for Electrically Operated Door Locks

  • UL 60730-2-13, Automatic Electrical Controls for Household and Similar Use - Part 2, Particular Requirements for Humidity Sensing Controls

  • UL 60730-2-14, Automatic Electrical Controls for Household and Similar Use - Part 2, Particular Requirements for Electric Actuators

  • UL 60730-2-15, Automatic Electrical Controls for Household and Similar Use - Part 2, Particular Requirements for Automatic Electrical Air Flow, Water Flow and Water Level Sensing Controls

  • UL 60745-1, Standard for Hand-Held Motor-Operated Electric Tools - Safety - Part 1: General Requirements

  • UL 60745-2-1-2006, Hand-Held Motor-Operated Electric Tools - Safety - Part 2-1: Particular Requirements for Drills and Impact Drills

  • UL 60745-2-2-2006, Hand-Held Motor-Operated Electric Tools - Safety - Part 2-2: Particular Requirements for Screwdrivers and Impact Wrenches

  • UL 60745-2-4-2006, Hand-Held Motor-Operated Electric Tools - Safety - Part 2-4: Particular Requirements for Sanders and Polishers Other Than Disk Type

  • UL 60745-2-5-2004, Standard for handheld Motor-Operated Electric Tools - Safety - Part 2: Particular Requirements for Circular Saws

  • UL 60745-2-6-2006, Safety for Hand-Held Motor-Operated Electric Tools - Safety - Part 2-6: Particular Requirements for Hammers

  • UL 60745-2-8-2006, Hand-Held Motor-Operated Electric Tools - Safety - Part 2-8: Particular Requirements for Shears and Nibblers

  • UL 60745-2-9-2006, Hand-Held Motor-Operated Electric Tools - Safety - Part 2-9: Particular Requirements for Tappers

  • UL 60745-2-11-2004, Standard for Safety for Hand-Held Motor-Operated Electric Tools - Safety - Part 2-11: Particular Requirements for Reciprocating Saws

  • UL 60745-2-12-2005, Standard for Safety for Hand-held Motor-operated Electric Tools - Safety - Part 2-12: Particular Requirements for Concrete Vibrators

  • UL 60745-2-14-2006, Hand-Held Motor-Operated Electric Tools - Safety - Part 2-14: Particular Requirements for Planers

  • UL 60745-2-15, Standard for Safety for Hand-Held Motor-Operated Electric Tools - Saftey - Part 2-15: Particular Requirements for Hedge Trimmers

  • UL 60745-2-17-2006, Hand-Held Motor-Operated Electric Tools - Safety - Part 2-17: Particular Requirements for Routers and Trimmers

  • UL 60745-2-18, Standard for Hand-Held Motor-Operated Electric Tools - Safety - Part 2-18: Particular Requirements for Strapping Tools

  • UL 60745-2-19, Hand-Held Motor-Operated Electric Tools - Safety - Part 2-19:Particular Requirements for Jointers

  • UL 60745-2-20, Standard for Hand-Held Motor-Operated Electric Tools - Safety - Part 2-20: Particular Requirements for Band Saws

  • UL 60745-2-21, Standard for Hand-Held Motor-Operated Electric Tools - Safety - Part 2-21: Particular Requirements for Drain Cleaners

  • UL 60939-3, Passive Filter Units for Electromagnetic Interference Suppression - Part 3: Passive Filter Units for Which Safety Tests are Appropriate

  • UL 60947-1, Standard for Safety for Low-Voltage Switchgear and Controlgear - Part 1: General Rules

  • UL 60947-4-1, Standard for Safety for Low-Voltage Switchgear and Controlgear; Part 4-1: Contactors and motor-starters; Electromechanical contactors and motor-starters

  • UL 60947-4-2, Low-Voltage Switchgear and Controlgear - Part 4-2: Contactors and Motor-Starters - AC Semiconductor Motor Controllers and Starters

  • UL 60947-5-1, Low-Voltage Switchgear and Controlgear - Part 5-1: Control Circuit Devices and Switching Elements - Electromechanical Control Circuit Devices

  • UL 60947-5-2, Low-Voltage Switchgear and Controlgear - Part 5-2: Control Circuit Devices and Switching Elements - Proximity Switches

  • UL 60947-7-3, Standard for Fuse Terminal Blocks

  • UL 60950-1, Information Technology Equipment - Safety - Part 1: General Requirements

  • UL 60950-21, Information Technology Equipment -- Safety -- Part 21: Remote Power Feeding

  • UL 60950-22, Information Technology Equipment - Safety - Part 22: Equipment to be Installed Outdoors

  • UL 60950-23-2007, Information Technology Equipment - Safety - Part 23: Large Data Storage Equipment

  • UL 61010-1, Electrical Equipment for Measurement, Control, and Laboratory Use; Part 1: General Requirements

  • UL 61010-031

    Yüklə 0,55 Mb.

    Dostları ilə paylaş:
1   2   3   4   5   6   7




Verilənlər bazası müəlliflik hüququ ilə müdafiə olunur ©azkurs.org 2020
rəhbərliyinə müraciət

    Ana səhifə