2022 Manitoba Workplace Safety and Health Act and Regulation

Hook block
23.37
An employer must ensure that a hook block has its rated load and
weight legibly cast or stamped on it in a conspicuous location.
VEHICLE LIFTS
Vehicle lift requirements
23.38(1) An employer must ensure that a vehicle lift meets the requirements
of the following standards:
(a) ANSI Standard ANSI/ALI ALCTV-2011, Automotive Lifts — Safety 
Requirements for Construction, Testing and Validation;
(b) ANSI Standard ANSI/ALI ALOIM-2008 (R2013), Automotive 
Lifts — Safety Requirements for Operation, Inspection and 
Maintenance;
(c) ANSI Standard ANSI/ALI ALIS:2009 (R2015), Standard for 
Automotive Lifts — Safety Requirements for Installation and 
Service.
23.38(2) An employer must ensure that a pneumatic or hydraulic vehicle lift
has controls operated by constant manual pressure.
23.38(3) An employer must ensure that the operator of a vehicle lift
(a) remains at the controls while the vehicle lift is in motion; and
(b) does not block the controls during raising and lowering.
23.38(4) An employer must ensure that no worker is under a suspended load
unless the load is supported by
(a) a vehicle lift designed for that purpose; or
(b) rated stands or blocks, other than jacks, that are designed,
constructed and maintained to support the load and placed on
firm foundations.
M.R. 128/2019

---

Workplace Safety And Health Regulation
224
PART 24 
PILE DRIVING
Application
24.1
This Part applies to every workplace where piles are driven into, or
removed from, the ground.
Safe work procedures
24.2
An employer must
(a) develop and implement safe work procedures respecting the use
of pile driving equipment;
(b) train workers in the safe work procedures; and
(c) ensure that workers comply with the safe work procedures.