Reference Specifications for Civil Engineering Work 2001


Table 7.2 – Minimum density schedule



Yüklə 73,69 Kb.
səhifə23/32
tarix26.12.2016
ölçüsü73,69 Kb.
#3343
1   ...   19   20   21   22   23   24   25   26   ...   32
Table 7.2 – Minimum density schedule

Location

Minimum relative compaction (standard)

(Cohesive soils generally)

(see Notes 1, 2, 3, 4)

Minimum density index

(Cohesionless soils)

(see Notes 1, 5)

Road and structural (other than building) formations including embankments, footpaths, paved areas and shoulders (see Note 6)







(a)  0.3 m below subgrade level

95%

65%

(b)  0.3 m below subgrade level

100%

80%

All other areas e.g. parks







(a)  0.3 m below finished surface level

90%

62%

(b)  0.3 m below finished surface level

95%

65%

Notes:

Field dry density to AS 1289.5.3.1, AS 1289.5.3.5 or AS 1289.5.8.1. If using AS 1289.5.8.1, calibrate the surface moisture-density gauge in accordance with AS 1289.5.8.4 before use.

Standard maximum dry density to AS 1289.5.1.1.

Relative compaction (% of maximum dry density) to AS 1289.5.4.1.

For plastic soils (designated under the unified classifications system as OH CH MH) compact to not less than 92% nor greater than 96% of standard maximum dry density at moisture contents of between 90% and 120% of optimum moisture content.

Density index to AS 1289.5.6.1. Maximum and minimum dry densities to AS 1289.5.5.1.

In the context of this specification, road formation is deemed to include all the area within the designated road reserve. Structural formation is deemed to include the area under the paving plus a nominal 1 m from the edge of the paved area.

Mechanical interlock method of construction

This construction method applies to granular fill. Place and compact coarse granular fill materials uniformly in layers. Roll each layer until no permanent visible lowering of the surface occurs. The minimum thickness of uncompacted layers is 150 mm. Determine the maximum thickness of uncompacted layers from Table 7.3 for the specified module weights, which apply to both drawn and self-propelled single drum rollers. Interpolate layer thickness for module weights between the listed values.




Yüklə 73,69 Kb.

Dostları ilə paylaş:
1   ...   19   20   21   22   23   24   25   26   ...   32




Verilənlər bazası müəlliflik hüququ ilə müdafiə olunur ©azkurs.org 2024
rəhbərliyinə müraciət

gir | qeydiyyatdan keç
    Ana səhifə


yükləyin