8 INTRODUCTION ACI 318 Building Code and Commentary Program for Fusion-Bonded Epoxy Coating Applicator
Plants. In addition, “Standard Specification for Agencies
Engaged in Construction Inspecting and/or Testing” (ASTM
E329-06a) specifies performance requirements for inspection
and testing agencies.
Design reference materials illustrating applications of the
Code requirements may be found in the following documents.
The design aids listed may be obtained from the sponsoring
organization.
Design aids: “ACI Design Handbook,” Publication SP-17(97), Amer-
ican Concrete Institute, Farmington Hills, MI, 1997, 482 pp.
(This provides tables and charts for design of eccentrically
loaded columns by the Strength Design Method of the 1995
Code. Provides design aids for use in the engineering design
and analysis of reinforced concrete slab systems carrying
loads by two-way action. Design aids are also provided for
the selection of slab thickness and for reinforcement required
to control deformation and assure adequate shear and
flexural strengths.)
“ACI Detailing Manual—2004,” ACI Committee 315,
Publication SP-66(04), American Concrete Institute, Farm-
ington Hills, MI, 2004, 212 pp. (Includes the standard, ACI
315-99, and report, ACI 315R-04. Provides recommended
methods and standards for preparing engineering drawings,
typical details, and drawings placing reinforcing steel in
reinforced concrete structures. Separate sections define
responsibilities of both engineer and reinforcing bar detailer.)
“Guide to Durable Concrete (ACI 201.2R-01),” ACI
Committee 201, American Concrete Institute, Farmington
Hills, MI, 2001, 41 pp. (This describes specific types of
concrete deterioration. It contains a discussion of the mech-
anisms involved in deterioration and the recommended
requirements for individual components of the concrete,
quality considerations for concrete mixtures, construction
procedures, and influences of the exposure environment.
