Tuflow and estry manual Version 3
A.3Simulation Time Control Commands (.tcf)
Yüklə 4,62 Mb.
|
A.3Simulation Time Control Commands (.tcf)Latitude == [ {0} | MI Projection == [ <.mif file> | ] 8 Snap Tolerance == [ {0.001} | BC Control File == <.tbc_file> 17 Check MI Save Date == [ {ERROR} | WARNING | OFF ] 17 Check MI Save Ext == [ {.tab} | End 2D Domain 18 ESTRY Control File [ {} | Auto] == <.ecf_file> 18 Geometry Control File == <.tgc_file> 18 Log Folder == Output Folder == Read File == Start 2D Domain == [ {} | <2d_domain_name> ] 19 Write Check Files == [ Write Empty MI Files == [ {} | End Time == Number Iterations == [ {2} | Start Time == Timestep == Timestep During Warmup == [ {timestep} | Warmup Time == [ {0} | Calibration Points MI File == <.mif/.mid_file> 37 Display Water Level == Map Output Data Types == [ d E F {h} q R SS t {V} Z1 Z2 Z3 ZH ] 37 Map Output Format == [ {SMS} | SMS WITH LAND CELLS | RMA2 ] 38 Map Output Interval == Mass Balance Output == [ ON | {OFF} ] 38 Read MI GLO == <.mif/.mid_file > 39 Screen/Log Display Interval == [ {1} | Start Map Output == Store Maximums and Minimums == [ ON | ON MAXIMUMS ONLY | {OFF} ] 39 Zero Negative Depths in SMS == [ {ON} | OFF ] 40 Bed Resistance Values == [ {MANNING N} | MANNING M | CHEZY ] 48 Depth/Ripple Height Factor Limit == [ {10} | Read Materials File == Recalculate Chezy Interval == [ {0} | Global FC Ch Factor == [ {0.8} | Read MI FC == <.mif/.mid_file> 57 CSV Time == [ {DAYS} | HOURS ] 65 Excel Start Date == Read MI LP == <.mif/.mid_file> 65 Read MI PO == <.mif/.mid_file> 65 Start Time Series Output == Time Series Output Interval == Write PO Online == [ ON | {OFF} ] 66 Read MI IWL == <.mif/.mid_file> 74 Read MID IWL == <.mid_file> 74 Set IWL == Read Restart File == <.trf_file> 82 Write Restart File at Time == Write Restart File Interval == [ {0} | Cell Side Wet/Dry Depth == [ {0.03} | Cell Wet/Dry Depth == [ {0.05} | HX ZC Check == [ {ON} | OFF ] 91 SX ZC Check == [ {ON} | OFF ] 92 Wetting and Drying == [ {ON} | ON NO SIDE CHECKS | OFF ] 92 Free Overfall == [ {ON} | ON WITHOUT WEIRS | OFF ] 100 Free Overfall Factor == [ {0.8} | Froude Check == [ {1} | Froude Depth Adjustment == [ {ON} | OFF ] 101 Global Weir Factor == [ {1.0} | Shallow Depth Weir Factor Cut Off Depth == [ {0} | Shallow Depth Weir Factor Multiplier == [ {1} | Supercritical == [ {ON} | OFF | PRE 2002-11-AD ] 102 Viscosity Coefficient == [ {1} | Viscosity Formulation == [ {CONSTANT} | SMAGORINSKY ] 110 Cell Size == First Sweep Direction == [ AUTOMATIC | {POSITIVE} | NEGATIVE ] 118 Instability Water Level == [ {see_below} | Water Level Checks == [ {ON} | OFF ] 126 BC Database == <.csv_file> 134 BC Event Name == BC Event Text == Adjust Head at Estry Interface == [ {ON} | ON VARIABLE | OFF ] 143 Check Inside Grid == [ {ERROR} | WARNING | OFF ] 143 Extrapolate Heads at Flow Boundaries == [ ON | {OFF} ] 143 Null Cell Checks == [ ON | {OFF} ] 144 Oblique Boundary Alignment == [ {NEAREST TO LINE} | CENTRE TO CENTRE ] 144 Oblique Boundary Method == [ {ON} | ON METHOD 2 | OFF ] 144 Unused HX and SX Connections == [ {ERROR} | WARNING ] 145 Apply Wind Stresses == [ ON | ON VARIABLE | {OFF} ] 153 Start Wind Output at Time == Wind Output Interval == Apply Wave Radiation Stresses == [ ON | {OFF} ] 161 Wave Period == 161 MI Projection == 9 Snap Tolerance == [ {0.001} | Check MI Save Date == [ {ERROR} | WARNING | OFF ] 17 Check MI Save Ext == [ {.tab} | CSV Format == [ HORIZONTAL | {VERTICAL} ] 17 CSV Time == [ {DAYS} | HOURS ] 17 Log Folder == Output Folder == Read File == Write CSV Online == [ ON | {OFF} ] 18 Write Empty MI Files == [ {} | Write Check Files == [ Bridge Flow == [ {Method A} | Method B ] 27 Culvert Flow == [ Method A | {Method B} ] 27 End Time == Froude Check == [ {1} | Froude Depth Adjustment == [ {ON} | OFF ] 28 Head Rate Creep Factor == [ Head Rate Limit == [ ON | {OFF} | Head Rate Limit Minimum == [ Start Time == Structure Losses == [ ADJUST | {FIX} ] 29 Timestep == Vel Rate Creep Factor == [ Vel Rate Limit == [ Vel Rate Limit Minimum == [ Order Output == [ {ON} | OFF ] 38 Output Interval [ {} | (s) ] == Output Times Same as 2D == [ {ON} | OFF ] 38 Read MI WLL == <.mif/.mid_file> 39 Read MI WLL Points == <.mif/.mid_file> 39 Start Output == WLL Additional Points == [ {0} | WLL Adjust XS Width == [ {ON} | OFF ] 39 WLL Approach == [ {Method A} | Method B ] 39 Apply All Inverts == [ ON | {OFF} ] 48 Conveyance Calculation == [ {CHANGE IN RESISTANCE} | ALL PARALLEL ] 48 Create Nodes == [ {ON} | OFF ] 48 Depth Limit Factor == [ {1} | Flow Area == [ {EFFECTIVE} | TOTAL ] 49 M11 Network == <.nwk11_file> 50 Minimum NA == [ {0} | Momentum Equation == [ PRE 2003-08-AD ] 50 Pit Channel Offset == [ {10} | Read MI Network == <.mif/.mid_file> 50 Read MI Table Links == <.mif/.mid_file> 50 Read Materials File == Relative Resistance == [ {RELATIVE} | MATERIAL ] 51 S Channel Approach == [ PRE 2004-06-AA ] 51 Storage Above Structure Obvert == [ {CHANNEL WIDTH} | Trim XZ Profiles == [ ON | {OFF} ] 52 XS Database == [ BG | CS | NA | VG ].... ! Fixed Field Flags 60 BG Data == CS Data == NA Data == VG Data == Read MI IWL == <.mif/.mid_file> 69 Set IWL == BC Database == <.csv_file> 77 BC Event Name == BC Event Text == EB Data == Read MI BC == <.mif/.mid_file> 78 Cell Size == Grid Size (N,M) == Grid Size (X,Y) == Orientation == Orientation Angle == Origin == Read MI Location == <.mif/.mid_file> 10 Read TGA == <.tga_file> 18 Read TGF == <.tgf_file> 18 External Bndy == Read MI [ MAT | IWL | CnM | FRIC | WrF | FLC ] == Read MI Code [ {} | BC ] == Read MID [ CODE | MAT | IWL | CnM | FRIC | WrF | FLC ] == Read MID Grid == Set [ CODE | MAT | IWL | CnM | FRIC | WrF ] == Write MI Domain == <.mif/.mid_file> 29 Write MI Grid == <.mif/.mid_file> 29 Allow Dangling Z Lines == [ ON | {OFF} ] 38 Default Land Z == Interpolate ZC [ {} | ALL ] [ {} | LOWER ] 38 Interpolate [ ZHC | ZUVC ] [ {} | ALL ] [ {} | AFTER ] 39 Pause When Polyline Does Not Find Zpt == [ ON | {OFF} ] 39 Read MI Z Line [ {} | RIDGE or MAX | GULLY or MIN | HX ] [ {} | CC ] [ {} | THICK ] [ {} | ADD ] == Read MI Zpts [ {} | ADD | MAX | MIN ] == Read MID Zpts [ {} | ADD | MAX | MIN ] == Set Zpt == Write MI Zpts == ZC == MIN(ZU,ZV) 42 Read File == Stop 51 BC Database == <.csv_file> 9 BC Event Name == BC Event Text == Global Rainfall Area Factor == [ {1.0} | Global Rainfall BC == Global Rainfall Continuing Loss == [ {0} | Global Rainfall Initial Loss == [ {0} | Read MI BC == <.mif/.mid_file> 10 Read MI SA [ {} | Rainfall ] == <.mif/.mid_file> 11 Unused HX and SX Connections == [ {ERROR} | WARNING ] 11 End Time == (Mandatory) Specifies the finish time of the simulation in hours. Value must be greater than the start time and can be negative. Number Iterations == [ {2} | (Optional) Specifies the number of iterations per timestep (refer to Stelling (1984) or Syme (1991)). It is rare this value is changed from 2, the default. Doubling the number of iterations slows down the simulation by roughly a factor of two. Start Time == (Mandatory) Specifies the start time of the simulation in hours. Value can be negative and it is recommended that it be relative to midnight for historical events. Timestep == (Mandatory) Specifies the computation timestep of the simulation in seconds. Value must be greater than zero. Timesteps that divide equally into one minute are recommended. For example, 0.5, 1, 2, 3, 5, 6, 7.5, 10, 12, 15, 20, 30, 45, 60, etc. seconds. As of Build 2005-05-AN, different timesteps can be specified for different 1D and 2D domains. If the command is specified outside a Start 2D Domain / End 2D Domain block, the timestep will apply to any 2D domain that is not given a timestep. If it is specified within a Start 2D Domain / End 2D Domain block it only applies to that 2D domain. Timestep During Warmup == [ {timestep} | (Optional) Warmup timestep in seconds that is applied during the warmup time. Only used if the warmup time is greater than zero (see “Warmup Time” command). Default value is the computational timestep. Warmup Time == [ {0} | (Optional) Time in hours from the simulation start, during which, a different timestep is applied (see “Timestep During Warmup” command). Rarely used. Yüklə 4,62 Mb. Dostları ilə paylaş:
|