Instructions for Bobcat Telescopic Handlers and Attachments 3 Safety is the operator’s responsibility -3

Do not allow anyone to ride in or on any part of the
machine.

Before any manoeuvre, make sure that the ground can
support the weight of the machine and the load in the
man platform.

During people-lifting manoeuvres, carry out all
movements of the boom gently and at a speed that does
not jeopardise the stability of the machine.

During people-lifting manoeuvres, always use the
minimum telescoping length required.


7


MariPfcitf

Operation & Maintenance Ma

m 111,1.1,- *■ Maintenance Manual 1 T4014Q mÊÊÊKum ■■ Safety Instructions WARNING * have read the instructions in this manual before operatingThe machine. Untrained operators can cause injury or death. A ^Never use^thB telescopic handler without reading ZiA See the machine signs (decals). Operation & Maintenance?^01’*- and data sheets located in the cab. ^0 A Safety Alert Symbol: This symbol with a warning statement means: “Warning, be alert! Your safety is at risk!” CarefTP read the message that follows. I a Do not use the machine where exhaust /!\ can come into contact with flammable material, explosive dust or gases. Incorrect Never exceed rated operating capacity. Keep to the limits of the machine's load chart and/or the attachment's nominal capacity. A Never use the telescopic handler without operator cab (ROPS & FOPS). A Check for undorgrcwne* w ovenb?. lines in the are-* tatapc foe machine. ncorrect For voifagos fi£ a minimum distance usC S nearest line and- tfie? 0Rgeh.:i&£ attachment, or lead. For voltages up to 54 PM, s minimum distance of 3 № between the nearest line and the machine arm, attachment, or load. Never use the machine as a working platform or an elevator unless it is equipped with a Bobcat-approved man platform. »ver transport a load when raisea. up. Load, unload and turn on flat level ground. y		Incorrect
J /		'dk '/(I '.- Jl Ik
j:
		§F%i

_A

Never leave telescopic handler with
engine running or with lift arms up.

To park, engage parking brake and place
attachment flat on the ground.





handler.


SAFETY EQUIPMENT


ie Bobcat telescopic handler must be equipped with safety systems
e of attachments and accessories.


SEAT BELT: Check belt fasteners and check for damaged
straps or buckles.

OPERATOR CAB (ROPS & FOPS): This must be on the machine
with all fasteners tight. Never.use the machine when the right
side window is missing.


necessary for each job. Ask your dealer for information on the safe

• 
  MACHINE SIGNS (Decals): Replace if damaged.
  
• 
  SAFETY TREADS: Replace if damaged. J *»•
  
• 
  GRAB HANDLES: Replace if damaged.
  
• 
  PARKING BRAKE
  

OPERATION & MAINTENANCE MANUAL : This must be in the
cab for the machine one and in the relevant box on the
Manplatform for its one.


• WINDOWS AND MIRRORS: Clean and check for broken
windows or mirrors. Replace if damaged.