Electrical design and installation of solar pumps

4 - Pump controller or inverter
Brand
Max power
Watts
Model
Max admissible voltage (PV)
volts
Serial number
Max voltage output to pump
volts
5 - Solar panels
Brand
Total power installed
Watt-crête (Wc)
Model
Minimum voltage for pump start
volts
Number of solar panels
Max voltage of system assembly
volts
Unit power of each solar panel
Watt-peak (Wp)
6- Tank
Material
Capacity
m3
Tank filling time
7- Remarks and comments
SOLAR PUMPING IDENTIFICATION SHEET

---

37
SOLAR PUMPING
Guidelines - Electrical design and installation of solar pumps
ANNEX 04
CHECKLIST FOR COMMISSIONING 
To be downloaded from the intranet NHF: 
https://actioncontrelafaim.sharepoint.com/:f:/r/csw/lsi/Thematics%20Priorities/Energy/EN%20-%20A4%20-%20Solar%20pumping?csf=1&web=1&e=Kd6zD5
Or request by email to 
[e-mail] 
Action Against Hunger
[e-mail]
1 - Solar panels
2 - Electric wiring
❏
Note brand & references of solar panels on the identification seet
❏
Verify type and section of cable
❏
Count number of solar panels
❏
Verify cable tightening in cabinet and at terminal connections
❏
Control orientation (south ou north following site of installation)
❏
Presence of cable glands at cabinet entrance
❏
Measure tilt of solar panels
❏
Minimum height from the ground of 0,5 m for any cabinet
❏
Measure the height from the ground (minimum 1 m)
❏
Cable cerrectly fixed and attached