Refer to the exhibit. Switch#show etherchannel summary

Answer:
C 
Question 25
Refer to the exhibit. 

---

An engineer is configuring the HO router. Which IPv6 address configuration must be applied to 
the router fa0/1 interface for the router to assign a unique 64-bit IPv6 address to itself? 
A. ipv6 address 2001:DB8:0:1:C601:42FF:FE0F:7/64 
B. ipv6 address 2001:DB8:0:1:C601:42FE:800F:7/64 
C. ipv6 address 2001:DB8:0:1:FFFF:C601:420F:7/64 
D. ipv6 address 2001:DB8:0:1:FE80:C601:420F:7/64 
Answer:
A 
Explanation
We must use IPv6 EUI-64 so that the router can assign a unique 64-bit IPv6 address to itself. 
Therefore we get the MAC address of C601.420F.0007 and: 
1. Split the MAC address in two halves (6 hex digits each) (so we have C601:42 for the first 
halves and 0F:0007 for the second halves) 
2. Insert FFFE in between the two, making the interface ID. 
3. Invert the seventh bit (to 1) of the interface ID if it is 0 (in this question this step is ignored as 
C6 = 11000110 -> the seventh bit is already 1) 
-> We get the interface ID of C601:42FF:FE0F:0007 or C601:42FF:FE0F:7 in short. We 
prepend the network prefix (64 bits) and get 2001:DB8:0:1:C601:42FF:FE0F:7 
Question 26
Refer to the exhibit. 

---

An engineer is configuring a new router on the network and applied this configuration. Which 
additional configuration allows the PC to obtain its IP address from a DHCP server? 
A. Configure the 
ip dhcp relay information
command under interface Gi0/1 
B. Configure the 
ip dhcp smart-relay
command globally on the router 
C. Configure the 
ip helper-address 172.16.2.2
command under interface Gi0/0 
D. Configure the 
ip address dhcp
command under interface Gi0/0