Refer to the exhibit. Switch#show etherchannel summary

Answer:
A 
Question 44
Refer to the exhibit. 
Router1(config)#interface GigabitEthernet0/0 
Router1(config-if)#ip address 209.165.200.225 255.255.255.224 
Router1(config-if)#ip nat outside 
Router1(config)#interface GigabitEthernet0/1 
Router1(config-if)#ip nat inside 
Router1(config)#interface GigabitEthernet 
Router1(config-if)#encapsulation dot1Q 100 
Router1(config-if)#ip address 10.10.10.1 255.255.255.0 
Router1(config)#interface GigabitEthernet0/1.200 
Router1(config-if)#encapsulation dot1Q 200 
Router1(config-if)#ip address 10.10.20.1 255.255.255.0 
Router1(config)#ip access-list standard NAT_INSIDE_RANGES 
Router1(config-std-nacl)#permit 10.10.10.0 0.0.0.255 
Router1(config)#ip nat inside source list NAT_INSIDE_RANGES interface 
GigabitEthernet0/0 overload 
Users on existing VLAN 100 can reach sites on the Internet. Which action must the 
administrator take to establish connectivity to the Internet for users in VLAN 200? 
A. Define a NAT pool on the router. 
B. Update the NAT INSIDF RANGFS ACL 
C. Configure the ip nat outside command on another interface for VLAN 200 
D. Configure static NAT translations for VLAN 200 
Answer:_B_Explanation'>Answer:
B 
Explanation

---

We need to add the “permit 10.10.20.0 0.0.0.255” command to the ACL. 
Question 45
Which protocol uses the SSL? 
A. HTTP 
B. HTTPS 
C. SSH 
D. Telnet 
Answer:
B 
Question 46
Drag and drop the facts about wireless architectures from the left onto the types of access point 
on the right. Not all options are used. 
Answer:
Autonomous Access Point
+ requires a management IP address 
+ accessible for management via Telnet, SSH, or a web GUI