Software platforms of 5G


Figure 14: Simulation of WLAN



Yüklə 2,79 Mb.
səhifə7/17
tarix22.05.2020
ölçüsü2,79 Mb.
#31356
1   2   3   4   5   6   7   8   9   10   ...   17
Information on 5G

Figure 14: Simulation of WLAN


Once the run simulation has been initiated we can see that for the convenience we have set the bandwidth to 20 MHz and by default the MIMO has been set to Space time block code (STBC), the multilevel coordinate search (MCS) has been set to 5, Number of antennas has been set to 2, Number of bytes has been set to 1050, Signal to Noise ratio (SNR) has been set to 20 and channel model has been set to B. In the graph the x axis has been set to Megahertz (MHz) and y axis has been set to decibels (dB). The top shading graph is the output of the signal before channel modeling and the bottom shade presentation is the output after channel modeling. The test bench also performs the measurements which also reports you the modulation and coding rate and it also continuously reports you the packet errors rate (PER) and the Bit Error Rate (BER) and packet by packet it computes the Root Mean Square (RMS) Error Vector Magnitude (EVM) values in percentage and Decibels (DB) and give the data rates.



Yüklə 2,79 Mb.

Dostları ilə paylaş:
1   2   3   4   5   6   7   8   9   10   ...   17




Verilənlər bazası müəlliflik hüququ ilə müdafiə olunur ©azkurs.org 2024
rəhbərliyinə müraciət

gir | qeydiyyatdan keç
    Ana səhifə


yükləyin