Cisco Certified Network Associate 0 (ccna)

Correct Answer: D


QUESTION 10
Refer to the exhibit.

Configured routers IPv6 addresses:

Atlanta:
S0/0/0: 2012::1/126 S0/0/1: 2013::1/126
Loopback1: 2000::1/128 New York:
S0/0/0: 2012::2/126 S0/0/1: 2023::2/126
Loopback2:2000::2/128 Washington:
S0/0/0: 2023::3/126 S0/0/1: 2013::3/126
Loopback3: 2000::3/128

The New York router must be configured so that traffic to 2000::1 is sent primarily via the Atlanta site, with a secondary path via Washington that has an administrative distance of 2. Which two commands must be configured on the New York router? (Choose two)

A. ipv6 route 2000::1/128 2012::1 5

B. ipv6 route 2000::1/128 2023::2 5
C. ipv6 route 2000::1/128 2012::1
D. ipv6 route 2000::1/128 2023::3 2
E. ipv6 route 2000::1/128 2012::2


Correct Answer: CD


QUESTION 11
Which interface condition is occurring in this output?

R19# show interface fa0/0 FastEthernet0/0 is up, line protocol is up

Hardware is DEC21140, address is ca02.7788.0000 (bia ca02.7788.0000) Description: portland_subnet
Internet address is 10.32.102.2/30
MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set
Keepalive set (60 sec)
Full-duplex, 100 Mb/s, 100BaseTX/FX ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:01, output 00:00:00, output hang never Last clearing of "show interface" counters never
Input queue: 0/300/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo
Output queue: 0/300 (size/max)
30 second input rate 0 bits/sec, 0 packets/sec
30 second output rate 0 bits/sec, 0 packets/sec
7331 packets input, 7101162 bytes
Received 267 broadcasts (0 IP multicasts)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog
0 input packets with dribble condition detected 3927 packets output, 1440403 bytes, 0 underruns
0 output errors, 139 collisions, 0 interface resets 0 unknown protocol drops
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out

1. 
   queueing
   
2. 
   duplex mismatch
   
3. 
   collisions
   
4. 
   high throughput