Instructions for Bobcat Telescopic Handlers and Attachments 3 Safety is the operator’s responsibility -3

MâfiïPlëtform
Operation & Maintenance Manual

>\escop'^c ivtoov© SAFETY Safety symbols WARNING This symbol with a warning statement, means: Warning, be alert! Your safety is at risk!” Carefully read the message that follows. — This sign identifies procedures which, must be followed to avoid damaging the machine. WARNING The operator must read the instructions before running the machine. Untrained operators can cause injury or death. Safe operation requires a qualified operator A qualified operator must understand the written instructions, rules and regulations. Written instructions from Bobcat include the Delivers Report, Operation & Maintenance Manual, Operator Handbook and machine signs (decals). Check the rules and regulations at your location. The rules may include an employer’s work safety requirements. Regulations may apply to local operatinn requirements or use of a Slow Moving Vehicle (SMVr emblem. A qualified operator must have training in actual operation Operator training should consist of a demonstration and verbal instruction. This training is given by your Bobcat dealer before the product is delivered. The new operator must start in an area with no bystanders and use all the controls until he/she can operate the machine and attachment safely under all conditions for the work area. Always fasten seat belt before starting the machine. A qualified operator must know the work conditions. A WARNING Warning signs on the machine and in the manuals are for your safety. Failure to obey warnings can cause injury or death. The Bobcat telescopic handler and attachment must be in good operating condition before use. The operator must know the weight of the materials being handled. Exceeding the Rated Operating Capacity is forbidden and the operator must comply with the load chart of the machine and attachment. Very dense material is heavier than the same volume of less dense material. Reduce the size of load if handling dense material. The operator must know any prohibited uses or work areas; in particular, he/she needs to know about steep slopes. The operator must enquire about the location of any underground lines or pipes. Where overhead power lines are present in the operating area, ensure sufficient clearance between the nearest of these lines and any part of the machine.	Minimum distance
upfesSOKV	3 m
htcjfw Swn 50 iCV	5m

• Wear fight-fittsng clothing. Always wear safety glasses
when perfomtiing maintenance or service work. Safety
glasses or hearing protection are required for some
work.





A qualified operator must not use drugs or alcoholic
drinks that impair his/her alertness or coordination while


working. An operator who is taking prescription drugs
must get medical advice to determine if he/she can
safely operate a machine.






SAFETY


Fire prevention Maintenance instructions


The machines and some attachments have components
that are at high temperatures under normal operating
conditions. The primary source of high temperatures is the
engine and exhaust system. The electrical system, if
damaged or incorrectly maintained, can be a source of
arcs or sparks.

•