Zako n o potvrđivanju regionalne konvencije o pan-evro –mediteranskim preferencijalnim pravilima o poreklu član 1



Yüklə 3.37 Mb.
səhifə7/35
tarix28.04.2017
ölçüsü3.37 Mb.
1   2   3   4   5   6   7   8   9   10   ...   35
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

3704

Photographic plates, film paper, paperboard and textiles, exposed but not developed

Manufacture from materials of any heading, except those of headings 3701 to 3704

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

ex Chapter 38

Miscellaneous chemical products; except for:

Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

ex 3801

- Colloidal graphite in suspension in oil and semi-colloidal graphite; carbonaceous pastes for electrodes

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product







- Graphite in paste form, being a mixture of more than 30 % by weight of graphite with mineral oils

Manufacture in which the value of all the materials of heading 3403 used does not exceed 20 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

ex 3803

Refined tall oil

Refining of crude tall oil

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

ex 3805

Spirits of sulphate turpentine, purified

Purification by distillation or refining of raw spirits of sulphate turpentine

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

ex 3806

Ester gums

Manufacture from resin acids

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

ex 3807

Wood pitch (wood tar pitch)

Distillation of wood tar

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

3808

Insecticides, rodenticides, fungicides, herbicides, anti-sprouting products and plant-growth regulators, disinfectants and similar products, put up in forms or packings for retail sale or as preparations or articles (for example, sulphur-treated bands, wicks and candles, and fly-papers)

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products




3809

Finishing agents, dye carriers to accelerate the dyeing or fixing of dyestuffs and other products and preparations (for example, dressings and mordants), of a kind used in the textile, paper, leather or like industries, not elsewhere specified or included

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products




3810

Pickling preparations for metal surfaces; fluxes and other auxiliary preparations for soldering, brazing or welding; soldering, brazing or welding powders and pastes consisting of metal and other materials; preparations of a kind used as cores or coatings for welding electrodes or rods

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products




3811

Anti-knock preparations, oxidation inhibitors, gum inhibitors, viscosity improvers, anti-corrosive preparations and other prepared additives, for mineral oils (including gasoline) or for other liquids used for the same purposes as mineral oils:










- Prepared additives for lubricating oil, containing petroleum oils or oils obtained from bituminous minerals

Manufacture in which the value of all the materials of heading 3811 used does not exceed 50 % of the ex-works price of the product







- Other

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product




3812

Prepared rubber accelerators; compound plasticisers for rubber or plastics, not elsewhere specified or included; anti-oxidizing preparations and other compound stabilizers for rubber or plastics

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product




3813

Preparations and charges for fire-extinguishers; charged fire-extinguishing grenades

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product




3814

Organic composite solvents and thinners, not elsewhere specified or included; prepared paint or varnish removers

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product




3818

Chemical elements doped for use in electronics, in the form of discs, wafers or similar forms; chemical compounds doped for use in electronics

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product




3819

Hydraulic brake fluids and other prepared liquids for hydraulic transmission, not containing or containing less than 70 % by weight of petroleum oils or oils obtained from bituminous minerals

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product




3820

Anti-freezing preparations and prepared de-icing fluids

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product




ex 3821

Prepared culture media for the development or maintenance of micro-organisms (including viruses and the like) or of plant, human or animal cells


Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product




3822

Diagnostic or laboratory reagents on a backing, prepared diagnostic or laboratory reagents whether or not on a backing, other than those of heading 3002 or 3006; certified reference materials

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product




3823

Industrial monocarboxylic fatty acids; acid oils from refining; industrial fatty alcohols:










- Industrial monocarboxylic fatty acids, acid oils from refining

Manufacture from materials of any heading, except that of the product







- Industrial fatty alcohols

Manufacture from materials of any heading, including other materials of heading 3823




3824

Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:










- The following of this heading:

-- Prepared binders for foundry moulds or cores based on natural resinous products

-- Naphthenic acids, their water-insoluble salts and their esters

-- Sorbitol other than that of heading 2905



Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product




-- Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts

-- Ion exchangers

-- Getters for vacuum tubes











-- Alkaline iron oxide for the purification of gas

-- Ammoniacal gas liquors and spent oxide produced in coal gas purification

-- Sulphonaphthenic acids, their water-insoluble salts and their esters

-- Fusel oil and Dippel's oil

-- Mixtures of salts having different anions

-- Copying pastes with a basis of gelatin, whether or not on a paper or textile backing












- Other

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product




3901 to 3915

Plastics in primary forms, waste, parings and scrap, of plastic; except for headings ex 3907 and 3912 for which the rules are set out below:










- Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content

Manufacture in which:

- the value of all the materials used does not exceed 50 % of the ex-works price of the product, and



- within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product (5)

Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product




- Other

Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product (5)

Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

ex 3907

- Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS)

Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product (5)







- Polyester

Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product and/or manufacture from polycarbonate of tetrabromo-(bisphenol A)




3912

Cellulose and its chemical derivatives, not elsewhere specified or included, in primary forms

Manufacture in which the value of all the materials of the same heading as the product used does not exceed 20 % of the ex-works price of the product




3916 to 3921

Semi-manufactures and articles of plastics; except for headings ex 3916, ex 3917, ex 3920 and ex 3921, for which the rules are set out below:










- Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked

Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product




- Other:










-- Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content

Manufacture in which:

- the value of all the materials used does not exceed 50 % of the ex-works price of the product, and

- within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product (5)


Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product




-- Other

Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product (5)

Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

ex 3916 and ex 3917

Profile shapes and tubes

Manufacture in which:

- the value of all the materials used does not exceed 50 % of the ex-works price of the product, and



- within the above limit, the value of all the materials of the same heading as the product used does not exceed 20 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

ex 3920

- Ionomer sheet or film

Manufacture from a thermoplastic partial salt which is a copolymer of ethylene and metacrylic acid partly neutralised with metal ions, mainly zinc and sodium

Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product




- Sheets of regenerated cellulose, polyamides or polyethylene

Manufacture in which the value of all the materials of the same heading as the product used does not exceed 20 % of the ex-works price of the product




ex 3921

Foils of plastic, metallised

Manufacture from highly-transparent polyester-foils with a thickness of less than 23 micron (6)

Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

3922 to 3926

Articles of plastics

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product




ex Chapter 40

Rubber and articles thereof; except for:

Manufacture from materials of any heading, except that of the product




ex 4001

Laminated slabs of crepe rubber for shoes

Lamination of sheets of natural rubber




4005

Compounded rubber, unvulcanised, in primary forms or in plates, sheets or strip

Manufacture in which the value of all the materials used, except natural rubber, does not exceed 50 % of the ex-works price of the product




4012

Retreaded or used pneumatic tyres of rubber; solid or cushion tyres, tyre treads and tyre flaps, of rubber:










- Retreaded pneumatic, solid or cushion tyres, of rubber

Retreading of used tyres







- Other

Manufacture from materials of any heading, except those of headings 4011 and 4012




ex 4017

Articles of hard rubber

Manufacture from hard rubber




ex Chapter 41

Raw hides and skins (other than furskins) and leather; except for:

Manufacture from materials of any heading, except that of the product




ex 4102

Raw skins of sheep or lambs, without wool on

Removal of wool from sheep or lamb skins, with wool on




4104 to 4106

Tanned or crust hides and skins, without wool or hair on, whether or not split, but not further prepared

Retanning of tanned leather

or

Manufacture from materials of any heading, except that of the product






4107, 4112 and 4113

Leather further prepared after tanning or crusting, including parchment-dressed leather, without wool or hair on, whether or not split, other than leather of heading 4114

Manufacture from materials of any heading, except headings 4104 to 4113




ex 4114

Patent leather and patent laminated leather; metallised leather

Manufacture from materials of headings 4104 to 4106, 4107, 4112 or 4113, provided that their total value does not exceed 50 % of the ex-works price of the product




Chapter 42

Articles of leather; saddlery and harness; travel goods, handbags and similar containers; articles of animal gut (other than silk worm gut)

Manufacture from materials of any heading, except that of the product
1   2   3   4   5   6   7   8   9   10   ...   35


Verilənlər bazası müəlliflik hüququ ilə müdafiə olunur ©azkurs.org 2016
rəhbərliyinə müraciət

    Ana səhifə