2022 Manitoba Workplace Safety and Health Act and Regulation

Lights
22.9(1) An employer must ensure that powered mobile equipment which
is operated during hours of darkness or in an area that is not
adequately illuminated is equipped with suitable headlights and back-
up lights that clearly illuminate the path of travel.
22.9(2) A supplier must ensure that powered mobile equipment that is
intended to be operated during hours of darkness is equipped with
suitable headlights and back-up lights that clearly illuminate the path
of travel.
Windshield and other transparent materials
22.10(1) An employer and a supplier must ensure that powered mobile
equipment which is equipped with a windshield is also equipped with
suitable windshield wipers and washers.
22.10(2) An employer and a supplier must ensure that any transparent material
used as part of the enclosure for a cab or canopy on powered mobile
equipment is made of safety glass or another material that gives at
least the equivalent protection against shattering.
Falling objects protective structures
22.11(1) An employer must ensure that, when there is a risk to the safety or
health of the operator of powered mobile equipment o r any other
worker who is required or permitted to be in or on the equipment
from a falling object, the equipment is equipped with a falling objects
protective structure that
(a) complies with the applicable requirements of
(i) SAE Standard J167_201701, Overhead Protection for 
Agricultural Tractors - Test Procedures and Performance 
Requirements,
(ii) ISO 3449:2005, Earthmoving Machinery - Falling-Object 
Protective Structures - Laboratory Test and Performance 
Requirements, or

---

Workplace Safety And Health Regulation
202
(iii) SAE Standard J1042_201206 - Operator Protection for 
General-Purpose Industrial Machines; or
(b) is certified by a professional engineer as providing the
equivalent or better protection than that of a structure that
complies with the requirements of clause (a).
22.11(2) An employer must ensure that any addition, modification or
structural repair of a falling objects protective structure is done in
accordance with the instructions of, and is recertified as restored
to its original performance requirements by, the equipment
manufacturer or a professional engineer.
M.R. 128/2019