Cisco Certified Network Associate 0 (ccna)

Correct Answer: A


QUESTION 48
Refer to the exhibit.


EIGRP: 192.168.12.0/24 RIP: 192.168.12.0/27 OSPF: 192.168.12.0/28

How does the router manage traffic to 192.168.12.16?

1. 
   It selects the RIP route because it has the longest prefix inclusive of the destination address.
   
2. 
   It load-balances traffic between all three routes.
   
3. 
   It chooses the OSPF route because it has the longest prefix inclusive of the destination address.
   
4. 
   It chooses the EIGRP route because it has the lowest administrative distance.
   

Correct Answer: A


QUESTION 49
Drag and drop the VLAN port modes from the left onto the descriptions on the right.

A. -> allows the port to belong to one VLAN when manually configured: static access

-> allows the port to be assigned automatically to one VLAN: dynamic access
-> allows the port to belong to one or more VLANs: trunk
-> allows the port to support a single VLAN across a service-provider network: private
-> allows the port to communicate with others within the same community VLAN: tunnel


Correct Answer: A


QUESTION 50
Refer to the exhibit.

CPE# show ipv6 route

IPv6 Routing Table - default - 6 entries
Codes: C - Connected, L - Local, S - Static, U - Per-user Static route B - BGP, R - RIP, H - NHRP, II - ISIS L1
I2 - ISIS L2, IA - ISIS interarea, IS - ISIS summary, D - EIGRP
EX - EIGRP external, ND - ND Default, NDp - ND Prefix, DCE - Destination NDr - Redirect, O - OSPF Intra, OI - OSPF Inter, OE1 - OSPF ext 1
OE2 - OSPF ext 2, ON1 - OSPF NSSA ext 1, ON2 - OSPF NSSA ext 2
la - LISP alt, lr - LISP site-registrations, ld - LISP dyn-eid
lA - LISP away, le - LISP extranet-policy, lp - LISP publications ND ::/0 [2/0]
via FE80::A8BB:CCFF:FE00:200, Ethernet0/0 NDp 2001:DB8:1234:1::/64 [2/0]
via Ethernet0/0, directly connected
L 2001:DB8:1234:1:A8BB:CCFF:FE00:100/128 [0/0]
via Ethernet0/0, receive
C 2001:DB8:1234:2::/64 [0/0]
via Ethernet0/1, directly connected
L 2001:DB8:1234:2:A8BB:CCFF:FE00:110/128 [0/0]
via Ethernet0/1, receive L FF00::/8 [0/0]
via Null0, receive

The administrator must configure a floating static default route that points to 2001:db8:1234:2::1 and replaces the current default route only if it fails. Which command must the engineer configure on the CPE?

A. ipv6 route ::/0 2001:db8:1234:2::1 2

B. ipv6 route ::/0 2001:db8:1234:2::1 3
C. ipv6 route ::/128 2001:db8:1234:2::1 3
D. ipv6 route ::/0 2001:db8:1234:2::1 1