Installation Guide: IntelliFlo3 and IntelliPro3 vsf pool Pump

Relocating the WiFi Antenna
The pump communicates wirelessly via a 
Bluetooth
®
Wireless Technology connection with your personal device, or a 
2.4ghz WiFi connection with your home router. 
The drive's WiFi antenna features a male SMA bulkhead connector on the outside of the top cover and can be 
removed by loosening the antenna connector.
An SMA extension cable can be used to remotely mount the antenna in an area where it can receive a better signal. 
An extension cable is only recommended in order to relocate the antenna to a more favourable location; such as 
outside of a masonry enclosure or around the corner of a building. In most other cases using an extension cable will 
harm the signal.
To avoid dangerous or fatal electrical shock hazard, switch OFF power to motor before working on pump or motor.
FIRE AND BURN HAZARD
. The pump motor may run at high temperatures. To reduce the risk of fire, do NOT allow leaves, debris, or 
foreign matter to collect around the pump motor. To avoid burns when handling the motor, shut off the motor and allow it to cool for 20 
minutes before servicing. The pump provides an automatic internal cutoff switch to protect the motor from heat damage during operation.
To avoid electrical hazard, do NOT remove the four torx-head screws from the drive.
DRIVE COMPONENTS
WIRING COVER 
SCREWS (x2)
WIRING COVER
DRIVE CONNECTION
RS-485 TERMINAL BLOCK
DRIVE
DRIVE TO MOTOR 
SCREWS (x4)
DRIVE COVER
DRIVE COVER SCREWS (x4)

---

19
INTELLIFLO3™ VSF / INTELLIPRO3™ VSF Variable Speed and Flow Pump Installation and Maintenance Guide
Drive LED Indicators
Each button on the drive; 
CONNECT, ON/STOP and 
QUICK CLEAN features an 
LED indicator.
Refer to the table to the right 
for a list of LED behaviors 
and what they are indicating.
= Solid LED
= Blinking LED
= Pulsing LED
TROUBLESHOOTING
Always disconnect power to the pump at the circuit breaker and relieve pressure in the filtration system before servicing the pump. Failure 
to do so could result in death or serious injury to serviceman, pool users or others due to electric shock. Do NOT attempt to adjust or 
service without consulting your dealer or a qualified pool technician. Read the entire Installation and Maintenance Guide before attempting 
to use, service, or adjust the pool filtering system or heater.